Sy-Klone Series 9001 Air Precleaner - For Gas Motors Under 4.8 Liters

EMAIL ISAAC@SNORKELUPGRADE.COM  QUESTIONS OR BOOK A PHONE CALL BY CLICKING HERE Snorkels vary in INLET SIZE. PLEASE MEASURE YOUR SNORKEL HEAD INLET OUTER DIAMETER. Use the drop-down menu to pick which inlet size adapter is right for you.  This Snorkel Upgrade is the Sy-Klone Series 9001. Which has a  CFM efficiency range of 100 CFM to 275 CFM. This is for Gas Engines up to 4.8 liters displacement size What is my snorkel inlet size? Check out our breakdown of what fits what. Snorkel inlet sizes can change depending on the make of your vehicle, model year, and brand of the snorkel. We are always compiling the data on what precleaner and adapter fit what vehicle + snorkel. So this list, and by no means limited to just these models and if you have a vehicle and snorkel that are not listed, email me! isaac@snorkelupgrade.com Tacoma -  First generation ARB Safari Snorkel: 3.5-inch inlet eBay: Generally 3.5-inch inlet Tacoma - Second and third generation Airflow Snorkel: 3.5-inch inlet   ARB Safari Snorkel: 4-inch inlet Dobinsons: 3.35-inch inlet  eBay: Generally 3.5-inch inlet 4Runner - First and second generation  ARB Safari Snorkel: 3.5-inch inlet eBay: Generally 3.5-inch inlet 4Runner - Third, fourth and fifth-generation Airflow Snorkel: 3.5-inch inlet  ARB Safari Snorkel: 4-inch inlet Dobinsons: 3.35-inch inlet  Lexus GX Airflow Snorkel: 3.5-inch inlet  ARB Safari Snorkel: 4-inch inlet eBay: Generally 3.5-inch inlet Ironman: 3.5-inch inlet Dobinsons: 3.35-inch inlet  FJ Cruiser Safari ARB: 3.5-inch inlet  eBay: 3.5-inch inlet  Xterra Airflow: 3.5-inch eBay: 3.5-inch Frontier  Airflow: 3.5-inch eBay: 3.5-inch Landcruiser (gas) Safari ARB: 3.5-inch inlet  Ebay: 3.5-inch inlet  Jeep (gas) AEV: 4-inch inlet Rugged Ridge: 3-inch inlet Email Isaac@snorkelupgrade.com with any questions!  Not all engines are the same and you want to make sure your Precleaner fits your engine like Cinderella's slipper, perfect... or should we say your Cylinderella.   We have run the numbers on CFM consumptions across all types of engines. In fact, it is the science we pride ourselves in. Decades of field testing forged the range of different Series 9000 Precleaners and adaptations to perfectly match the environment and CFM requirements of each engine to maximize particle separation. It's the Spin-Science applied across the design of the Dome and rotor that makes The Sy-Klone Series 9000 the market-leading engine Precleaner. Adapters are either included in the price of the item or can be purchased separately.   Want to talk about your rig, share some content with us, or learn more about your CFM consumption?    EMAIL: ISAAC@SNORKELUPGRADE.COM The snorkel pre-cleaner is a patented technology that uses the centrifugal force generated by the rotor inside of its dome to separate particles out of the air before going into your snorkel.  The pre-cleaner uses the airflow from your engine intake to spin a rotor which creates a cyclone style effect inside the dome pushing large particles to the inner wall of the dome where they are ejected. This makes the worries of rain, snow or lots of dusty on a dry day from coming into your snorkel and clogging your filter go away! With this pre-cleaner, you also don’t need to worry about adjusting your snorkel head or dumping out a pre-cleaner that catches debris.   The Product Series 9000® created by Sy-Klone®    Patented US-made technology Used across all major heavy equipment manufacturers for decades Standard issue on the military Humvee replacement the JLTV  Product compatibility The diameters of snorkel inlets normally range from 3 to 4 inches.  Fits most if not all snorkel kits on the market including, AEV, RuggedRidge, Bravo, Safari, and more. How to install Remove the current head from your snorkel. Measure the inlet after the snorkel head is removed (most cases your inlet will be 2 ½ inches, 3, inches or 4 inches).  Put your old snorkel head back on for the time being.  Order your pre-cleaner snorkel upgrade.  Once you have your pre-cleaner remove your old snorkel head. Insert rubber adapter. Place pre-cleaner on the inlet of your snorkel. Tighten down the metal clamp.  Go out on your next off-road adventure knowing you don’t need to worry about rain, heavy dust, snow, and other debris you might find yourself in.   Sy-Klone®, Series 9000® are registered trademarks of Sy-Klone International. Copyright © 2019 Sy-Klone International.