Smith's Polyaspartic 5000 - 87% Solids, 30 minute working time

i.e. high build topcoat over Metallic & Luster floors (>8 mils WFT) or as the body coat mixed with metallic; as a body coat or grout coat (up to 20 mils in a single lift) for Vinyl Chip and Color Quartz systems; as a pigmented grout coat over solid color Smith’s CPR Cementitious Urethane in food processing/production environments, etc.] where low odor, good chemical resistance, durability and color stability is required.  RECOMMENDED USE: Food & Beverage Floors U.V. Stable Grout Coat good for color stability over broadcast media systems (i.e. Vinyl Chip or Color Quartz) Grout Coats as well as High Build, High Gloss Topcoat for Metallic & Luster floors (>8 mils) Ideal for: Food & Beverage Floors Commercial, Institutional, Retail & Residential environments Pharmaceutical Floors HIGHLIGHTS: Much lower odor vs. Smith’s Polyaspartic 1000 or Smith’s Polyaspartic 2000 Superior Build & Leveling Can achieve a high gloss “epoxy like” finish when applied over a flat, smooth surface at >8 mils May be installed up to 20 mils per lift For Interior & Exterior Use – U.V. Light Stable Forklift traffic after 24 to 36 hours (depending on mil thickness, temperature & humidity) Durable – Chemical Resistant Good Working Time – 25 minutes @ 72°F (121°C) with 50% Ambient Humidity Easy to clean Resistant to Hot Tire Pickup Incidental Hot Liquid Spill Tolerant to 230°F (121°C) when applied over a thermal shock resistant coating system, such as Smith’s CPR products or similar Meets FDA, USDA, CFIA standards for flooring Clear; Accepts Smith’s ISC solid color packs (sold separately)