Smith's Poly WB+ DIRECT SHIP ONLY

Smith’s Poly-WB+ is a 2-component, high performance, waterborne, Aliphatic Polyurethane sealer / topcoat which yields a hard, durable protective wear surface for use over decorative concrete or resinous floor coatings in commercial or residential environments with mild to heavy foot traffic exposure as well as residential garage floors. Developed for interior or exterior wear surfaces to protect against staining, chemicals, long-term chalking in Ultra Violet light exposure environments. Direct-to-concrete, stone & paver applications require a primer of Smith’s Poly-SB (achieves wet look); Smith’s Poly-SEAL (natural appearance without color enhancement); Smith’s Epoxy FW38 (interior only priming Grind & Seal applications) or directly over Smith’s Color Floor stains. Available in either a High Gloss or Matte finish. Both finishes achieve a wet-look to boost color & depth of stains when applied as a clear topcoat over Smith’s Color Floor or Smith’s Color Wall stains. For solid colors, optional Smith’s WSC Color Packs are available separately. RECOMMENDED AS A FINAL TOPCOAT FOR: Commercial & Residential: Decorative & Stamped Concrete Concrete Countertops Terrazzo Sealer for Vinyl Chip resinous coating systems Metallic Epoxy topcoat Pavers HIGHLIGHTS: Good Pot-life 1 hour at 72°F / 50% Humidity U.V. Stable Poly-WB+ does not chalk nor yellow Abrasion, stain & chemical resistant Superior performance vs. traditional solvent-based acrylic sealers User friendly to mix & apply Conveniently mix in packaging when mixing entire kit Yields a more desirable appearance less prone to roller lines than typical 2-component waterbased Polyurethanes Easy to clean & maintain “Wet Look” color enhancement of stained concrete Non-Blushing Applies Milky but dries Clear Tintable with Smith’s WSC Color Packs for use as a solid color topcoat over a solid color base Hot tire pick up resistant Low VOC’s & Low Odor – Meets Source Specific Standards Rule 1113 established by AQMD in California