Smith’s Poly-Flex DIRECT SHIP ONLY

Smith’s Poly-FLEX is a Heavy-Duty, 2-Component, Moisture Tolerant, Semi-Rigid Polyurethane Flowable Resurfacing Compound with good elongation characteristics to aid in suppressing minor cracks from telegraphing through yet rigid enough for traditional applications. Walkable in roughly 2 ½ hours and accepts subsequent layers/systems in as little as 4 hours.  Applies from a minimum of 30 mils up to 5 inches in a single lift.  Tenaciously bonds to a variety of substrates. Smith’s Poly-FLEX is freeze/thaw stable allowing for use as a base for interior and exterior resinous or cement overlay (with a sand broadcast) systems.  Also suitable over radiant floor heating systems.  Smith’s Poly-FLEX suppresses up to 15 lbs. (ASTM F-1869) or 90% RH (ASTM F-2170) of osmotic moisture vapor transmission with up to 14 pH on concrete slabs when properly mechanically prepared. RECOMMENDED USES: Base layer for: Double Broadcast Color Quartz CPR Cementitious Polyurethane Vinyl Chip Epoxy Slurry Epoxy Mortar Trowel Color quartz epoxy mortar Shop Floor systems Smith’s 4in1 Overlay Metallic floor coating systems and more DOCUMENTS: Product Data Sheet Safety Data Sheets Color Chart - Smith's ISC Solid Colors Flyer - Flexible Vinyl Chip system Catalog - Smith's Industrial Floor Coatings Application Guide - Flexible Full Broadcast High Build Vinyl Chip system APPROVED SUBSTRATES: Ceramic, Porcelain, Stone & Quarry Tiles Well Bonded, mechanically prepared existing coatings (i.e. Epoxy, Cementitious Urethane, Methyl Methacrylate, Polyaspartic & Polyurethane) Concrete & Polymer Modified Overlays Metal Floors (Stainless Steel, Iron, Steel, Copper, Treated Aluminum*) Terrazzo Wood Subfloors (underlayment grade plywood or OSB; requires use of Smith’s Epoxy FW38 primer) HIGHLIGHTS: Self-Leveling (when applied greater than 30 mils) 100% Solids – Contains no Solvents or Water Chemical Resistant Alkalinity Resistant Tenacious Bond Low Odor & Zero VOC’s Flexible Resists Aging & Elasticity Fatigue Suppresses Minor Cracks from Telegraphing to surface Suitable for use over In-floor Radiant Heat systems Accepts a variety of Floor Coating & Cementitious Overlays within in 4 hours at 72°F & 50% Humidity Withstands up to 15 lbs. (per ASTM F1869) and up to 90% In-situ Relative Humidity (per ASTM F2170)