Positive Displacement Smith meters

Smith SD-30-DI, F4-S1, G6-S1, H8-S1 positive displacement petroleum meters for the railroad. Ask about services, parts, accessories, rebuilt used meters, and advice today. The Smith Meter Rotary Vane Meter principle, combined with the meter's uniquely designed (offset) inlet and outlet nozzles, minimizes pressure drop across the measuring chamber, which reduces flow through meter clearances to maximize accuracy. CALL FOR QUOTE! Smith meters or parts sold by Railyard Supply cannot have an end user outside of the United States. Smith SD-30-DI Meter Model: SD-30-DI Material: Ductile Iron Max Flow Rate: 320 gpm or 1,200 lpm Min Flow Rate: 64 gpm Inlet/Outlet: 3" ANSI 150 Case: Single-Case Style: Rotary Vein Displacement Type: Positive Displacement Temp w/ Buna or PTFE Seals: -20 to 150 def F Temp w/ Viton Seals: 10 to 150 def F Length (flange to flange): 14.5" Max Working Pressure: 150 psig Gearing: 5 U.S. Gallons per Revolution of Calibrator Output Shaft. SD-30-DI Spec Sheet Smith F4-S1 PD Meter Size: 4" Style: Rotary Vane Type: Positive Displacement Body Material: Steel Model: F4-S1 Flange: ANSI 150 Max Pressure: 150 psi or 1034 kPa Max Continuous Flow Rate: 600 gpm Seals: Buna N Max Viscosity: 400 mPa*s^4 Temp: -20 deg F to 150 deg F Dimensions: Height: 23.4" Height w/ VR Register and Printer: 32.8" Face to Face: 20.0" Pipe Midline to Center Vertical Axis of Meter: 5.5". F4-S1 Spec Sheet Smith G6-S3 PD Meter *G6-S1 meter is no longer available new, replaced with G6-S3 Size: 6" Style: Rotary Vane Type: Positive Displacement Body Material: Steel Model: G6-S1 Flange: ANSI 150 Max Pressure: 150 psi Max Continuous Flow Rate: 1000 gpm Seals: Buna N Max Viscosity: 400 mPa*s^4 Temp: -20 deg F to 150 deg F Dimensions: Height: 27.0" Height w/ VR Register and Printer: 36.4" Face to Face: 23.0" Pipe Midline to Center Vertical Axis of Meter: 6.5". G6-S1 Spec Sheet Smith H8-S1 PD Meter Size: 8" Style: Rotary Vane Type: Positive Displacement Body Material: Steel Model: H8-S1 Flange: ANSI 150 Max Working Pressure: 150 psi or 1034 kPa Max Continuous Flow Rate: 1600 gpm Seals: Buna N Max Viscosity: 400 mPa*s^4 Temp: -20 deg F to 137 deg F Dimensions: Height: 32.9" Height w/ VR Register and Printer: 42.3" Face to Face: 28.0" Pipe Midline to Center Vertical Axis of Meter: 9.0". H8-S1 Spec Sheet Low Pressure Drop due to streamlined flow path. Unsurpassed in reliability and superior custody transfer accuracy, FMC Technologies Smith Meter® Positive Displacement Meters remain the standard in the petroleum industry today. The metering mechanism is an inner unit bolted into the outer housing. The double case design eliminates distortion of the measuring chamber due to pressure differential and piping strains. Refer to Smith meter parts and accessories section or call for information on gear plates, calibrators, meter registers, etc. Superior Accuracy Low Pressure Drop Positive and Accurate Registration Long Service Life Experience since 1984. Rebuild services, installation services, and calibration services available.