CyberPower Smart App Online 3-Phase Modular UPS SM020KAMFA

BRAND NEW FACTORY SEALED & RETAIL BOXED WITH THE FULL CYBERPOWER WARRANTY!!! The CyberPower SM020KAMFA Smart App Online 3-Phase Modular UPS System brings flexibility, space savings, and efficiency to 3-Phase power protection technology. Configurable for N+N system or N+1 power module redundancy, the system can intelligently manage individual modules to achieve higher efficiency. The customizable modular design can be configured as a tower, side-by-side, or integrated within a rack. The high-density, scalable 10kVA/10kW power modules are 2U in height, saving space while providing more options for capacity expansion. The SM020KAMFA features double-conversion topology for seamless power protection and a pre-installed RMCARD205 for remote management. The user-friendly 7” color touchscreen displays key status indicators at-a-glance. Three-stage Smart Battery Management (SBM) equalizes battery voltages and reduces excessive heat to extend battery life. Plus, hot-swappable power modules, battery and, bypass allow for rapid replacement and minimal impact to system operation. Ideal for high-end data centers, the SM020KAMFA Smart App Online 3-Phase Modular UPS System assures reliable, high-quality AC power and includes a One-Year Limited Warranty. Specifications Brand: CyberPower SKU # SM020KAMFA General Dual Power Inputs: Yes Energy Saving: Online ECO Mode Efficiency >97.5% Hot Swappable Bypass Module: Yes – Qualified Personnel Only Hot Swappable Power Module: Yes – Qualified Personnel Only Module Maximum Capacity: 3 Parallel Expansion (Max. Units): 2 Power Module Redundancy Capability: Yes UPS Topology: Online Double Conversion Battery Battery Bus Voltage: Nominal: ±120VDC, one-side range: 120VDC – 132VDC Battery Cabinet: Modular External Charger Voltage Tolerance: ?1% Float Extended Battery Module: BCT3L9N125 Hot Swappable: Yes Hot Swappable Battery Module: Yes – Qualified Personnel Only Recharge Power: Default 10% x UPS Power Recharge Power (Selectable): 1 % – 20 % Replacement Battery Cartridge Quantity: 6 Ripple Current: ?5% C10 Ripple Voltage: ?1% VDC Float Temperature Compensation (Per Cell): -3 mV/°C Input Backfeed Protection: Yes Bypass Input Voltage Range: -20 % – 15 % Bypass Input Voltage Range (Selectable): Lower limit: -10%, -20%, -30%, -40%, Higher limit: +10%, +15%, +20%, +25% Bypass Overload Protection: 110% – 130% Load for 5 Min, 130% – 150% Load for 1 Min, >150% Load for 300ms Bypass Rated Current: 55.6A@ 208V Bypass frequency tolerance (Default): ±10% Bypass frequency tolerance (Selectable): ±2.5%, ±5%, ±10%, ±20% Bypass to Inverter Switch Time: Synchronized switch: ?1ms Current rating of bypass neutral cable (A): 1.7 x Input Rated Current Input Connector: Hardwire (L1, L2, L3, N, G) Input Frequency Range: 40 Hz – 70 Hz Input Power Factor: 0.99 Input Voltage: 208/120V 220/127V Input Voltage Range: 187 VAC – 260 VAC Phase: 3 Phase Synchronization-Window: Rated frequency: ±2Hz Synchronization-Window (Selectable): ±0.5Hz – ±5Hz THDI (%): < 4% (Full Linear Load) Output Automatic Voltage Regulation: ±1 (Balanced Load), ±1.5 (100% Unbalanced Load) Bypass: Internal Bypass (Automatic and Manual) Crest Factor: 3:1 Efficiency: 92.5% (Battery Mode), 93% (Normal Mode) Harmonic Distortion: < 1.5% at Linear Load, < 6% at Non-Linear Load Maintenance Bypass: Yes Max Change Rate of Synch Frequency: 1 Hz/s Max Change Rate of Synch Frequency (Selectable): 0.1 – 5 Hz/s Maximum Capacity (VA): 20000 VA Maximum Watts Capacity: 20000 W Neutral Current Capability: 170 % Non-Linear Load Capability: 100 % On AC WaveForm: Sine Wave Outlet Type: 1 – Hardwire Terminal Block Output Connector: Hardwire (L1, L2, L3, N, G) Output Frequency: 50/60 Hz (auto-sensing/configurable) Output Power Factor: 1 Output Voltage: 208/120V 220/127V Output Voltage Range: ±5% VAC Overload Protection: 110% Load for 10 min, 125% Load for 1 min, 150% Load for 30 sec, >150% Load for 200 ms Short Circuit Protection: 300% – 200ms Synchronization Window (Rated ): ±2Hz Synchronization Window (Selectable): ±1Hz – ±5Hz Transient Voltage Response: ±5% Typical Transfer Time: 0 ms VA: 20000 VA Watts: 20000 W Management & Communications Dry Contacts: Yes Emergency Power Off (EPO) Port: Yes LCD: Multifunction LCD, Touch Screen, Color LED Indicators: Rectifier, Battery Mode, Bypass Mode, Inverter, Load, Status SNMP / HTTP Remote Monitoring: Yes – RMCARD205 pre-installed Serial Port: 1 RS232, 1 RS485 Software (Free Download): PowerPanel Business Physical Color: Black Form Factor: Modular Material of Construction: Metal Mounting Hardware: Yes Rack Height: 11U Dimensions Physical Dimensions – (WxHxD) (in): 19.1 x 23.9 x 30.5 (in) Physical Weight (lb): 133.8 Dimensions – Shipping Shipping – Weight (lb): 202.75 Shipping Dimensions – (WxHxD) (in): 24.88 x 31 x 40.25 (in) Dimensions – Power Module Power Module – Rack Units: 11U Environmental Audible noise at 1m from surface of unit: 56 dBA Ingress Protection: IP20 Maximum Air Exchange: 3.02 m3 /min Online Thermal Dissipation: 5732.16 BTU/hr Operating Elevation: 0 – 10000 ft (0 – 3048 m) Operating Elevation Note: At ?1000m above sea level, de-rate power by 1% per 100m between 1000m and 3048m Operating Relative Humidity: 0 – 95 % (non-condensing) Operating Temperature: 32 – 104 °F (0 – 40 °C) Operating Temperature Note: Battery life is halved for every 10°C increase above 20°C Storage Battery Temperature Note: Optimum battery storage between -15°C and 20°C Storage Relative Humidity: 0 – 95% (non-condensing) Storage Temperature: -4 – 158 °F (-20 – 70 °C) Certifications Environmental: RoHS Compliant Safety: cTUVus, UL1778, CSA C22.2 No. 107.3-14, CFR 47 FCC Part 15, Subpart B, Class A, IEC62040-2 Warranty Product Warranty: 1 Year Limited Warranty