Siser StripFlock Pro 14.75" x 12" Sheet

StripFlock® Pro Heat Transfer Vinyl The Only Flock in the Industry that can be Layered on Itself! A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock Pro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-color designs. StripFlock Pro is CPSIA Certified so you can decorate kids' items with confidence. Specifications: PVC composition • Pressure sensitive backing • Suede-like finish • 410 Microns/16.1 Mils • 45°/60° blade•Can be layered CUTTER SETTINGS Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 20-25 (45°) / 15-20 (60°) Offset: .250 Speed: 10 Cricut Explore Air: Blade: AutoBlade, Standard Setting: Iron On Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Flocked Material: Smooth Speed: 5 Force: 6 Scan N Cut: Blade: Standard, 4 Cut Speed: 5 Cut Pressure: 2 Roland GS/GX-24: Blade: 45° Gram Force: 80-120 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram Force: 10 Tool: CB09U+0 Speed: 30 cm/s Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies Scan N Cut DX: Blade: AutoBlade Cut Speed: 5 Half Cut: 4 Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier warm Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 310°F/155°C • Use light/medium pressure for 15 seconds • Peel carrier warm (at least 10 seconds off press) RECOMMENDED ACCESSORIES & CARE StripFlock Pro Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Recommended Accessories: Siser Weeder Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean