Siser StripFlock 14.75" x 12" Sheet (Clearance) -50% Off-

StripFlock® Heat Transfer Vinyl The Only Flock in the Industry that can be Layered On Itself. A great alternative to embroidery, StripFlock heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock excellent for retro designs or anytime you want a rich look. StripFlock looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-color designs. Specifications: PVC Composition • Pressure sensitive backing • Suede-like finish • 410 Microns/16.1 Mils • 45°/60° blade • Can be layered CUTTER SETTINGS Cricut: Blade: Standard Setting: Iron-On+ Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Flocked Speed: 5 Force: 6 Scan N Cut: Blade: Standard, 4 Cut Speed: 1 Cut Pressure: 2 Roland GS/GX-24: Blade: 45° Gram Force: 80-120 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram Force: 10 Tool: CB09U+0 Speed: 30 cm/s Titan Series Blade: 45°/60° Gram Force: 100-110 Speed: 180mm/s *Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15-20 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier cold Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium pressure for 10-15 seconds • Peel carrier cold RECOMMENDED ACCESSORIES & CARE StripFlock Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Recommended Accessories: Siser Weeder Laundering: Wait 24 hours before 1st wash Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean