Siser EasyWeed Glow in the Dark 14.75" Roll (Yard)

EasyWeed® Glow Heat Transfer Vinyl Create Custom Designs that Glow in the Dark! EasyWeed Glow looks great in the daylight and glows in the dark! This polyurethane vinyl  is available in white and glows green! It cuts and weeds like our popular EasyWeed heat transfer vinyl. To get the glow effect, “charge” the material by exposing it to sunlight. The more light you give it, the brighter and longer it glows in the dark! Glow is great for crafters looking to create costumes, candy bags, and blanket forts that shine at bedtime. EasyWeed Glow can even be layered on other Siser materials for an awesome look. Layering EasyWeed Glow on top of white EasyWeed lets you create hidden messages and effects that reveal themselves in the dark! EasyWeed Glow is CPSIA Certified so even little ones can get in on the glow in the dark fun! Specifications: PU Composition • Pressure sensitive backing • Matte finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered CUTTER SETTINGS Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 5-10 Offset: .250 Speed: 10 Cricut Explore Air: Blade: AutoBlade, Standard Setting: Vinyl + Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 5 Scan N Cut: Blade: Standard, 2 Cut Speed: 5 Cut Pressure: 1 Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s MH, SC2, LP3, Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use light/medium pressure for 10-15 seconds • Peel carrier hot or cold RECOMMENDED ACCESSORIES & CARE EasyWeed Glow Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Recommended Accessories: Siser Weeder Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean