Siser EasyWeed Extra (For Nylon and Leather) 14.75" Roll (Yard)

EasyWeed® Extra Heat Transfer Vinyl Our Best-Selling Heat Transfer Vinyl - Now for Nylon! EasyWeed Extra shares almost all the great benefits of EasyWeed with the bonus of adhering to nylon! EasyWeed Extra is on a pressure-sensitive carrier so you can cut detailed logos and weed them effortlessly. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed Extra – with its semi-gloss finish, can be layered, extending your creativity and allowing you to say “yes” to more complicated designs. EasyWeed Extra can be cut with laser systems. EasyWeed Extra is CPSIA Certified so it's perfect for decorating children's clothing and accessories. Specifications: PU composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered CUTTER SETTINGS Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 5-10 Offset: .250 Speed: 10 Cricut Explore Air: Blade: AutoBlade, Standard Setting: Vinyl + Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Thickness: 6 Scan N Cut: Blade: Standard, 2 Cut Speed: 5 Cut Pressure: 1 Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s MH, SC2, LP3, Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use light/medium pressure for 10-15 seconds • Peel carrier hot or cold RECOMMENDED ACCESSORIES & CARE EasyWeed Extra Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Nylon Recommended Accessories: Siser Weeder Laundering: Wait 24 hours before 1st wash Machine wash warm or cold/ mild detergent Dry on normal dryer setting Do not dry clean Siser Romeo & Juliet: Blade: 45°/60°