Siser EasyWeed Electric 14.75" Roll (Yard)

EasyWeed® Electric Heat Transfer Vinyl Electrify Your Look with Unique Finishes If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You’ve never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeed Electric can be layered. EasyWeed Electric is CPSIA Certified so it's perfect for decorating children's clothing and accessories. Specifications: PU composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered CUTTER SETTINGS Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Thickness: 6 Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s MH, SC2, LP3, Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use light/medium pressure for 10-15 seconds • Peel carrier hot or cold RECOMMENDED ACCESSORIES & CARE EasyWeed Electric Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Recommended Accessories: Siser Weeder Laundering: Wait 24 hours before 1st wash Machine wash warm or cold/ mild detergent Dry on normal dryer setting Do not dry clean