Siser Easy Puff 20" x 12" Sheet

Easy™ Puff Heat Transfer Vinyl The unique way to customize apparel! Ready to raise your designs to the next level? As the name implies, Easy™ Puff is a unique HTV that "puffs" up from the garment when heat applied, transforming designs into a textured 3D look. Easy Puff provides a bold style that's perfect for lettering and other large designs that can highlight the elevated effect. With a pressure-sensitive carrier and low application temperature, Easy Puff truly lives up to its name! Easy™ Puff is CPSIA Certified so it's perfect for decorating children's clothing and accessories. Specifications: • PU Composition • 140 Microns/5.5 Mils Important Application Notes: • Easy Puff is designed to withstand only one heat application. Repeated applications will "flatten" the puff effect permanently. It is recommended to apply Easy Puff last when used with other materials. • Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron. • Texture of applied material can vary from lightly textured to heavily textured. CUTTER SETTINGS Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 5-10 Offset: .250 Speed: 10 Cricut Maker: Blade: AutoBlade, Fine-Point Setting: Heat Transfer (Non-Circut) Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5 Half Cut: Auto Silhouette Cameo 4: Blade: AutoBlade, 3 Material: Heat Transfer, Smooth Force: 6 Speed: 8 Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s US Cutter Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies Mimaki CG-60SR III Blade: 45° Gram Force: 80 Offset: 30 Speed: 20-30 cm/s Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron) • It is not recommended to apply this material with a home iron. Application Instructions (heat press) • Cut on glossy side • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 280°F/138°C • Use firm pressure for 8-10 seconds • Peel carrier hot RECOMMENDED ACCESSORIES & CARE Easy Puff Applies to: 100% cotton Poly/cotton blends 100% polyester Recommended Accessories: Siser Weeder Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean