Siser Easy Crease and Easy Etch Tools

HeatPressNation is proud to be a Siser Authorized Distributor. The Easy® Crease and Easy® Etch Tools are the perfect way to expand the possibilities of your Romeo® or Juliet® cutter! Create invitations, cards, boxes, faux flowers, and other papercrafts with the Easy Crease Tool. Or engrave wood, metal, acrylic, leather, and more with the Easy Etch Tool. Easy® Crease Materials Paper Cardstock Cardboard Envelopes Gift Tags Gift Bags Boxes Photo Albums And More Easy® Etch Materials Wood Leather Faux Leather Acrylic Vellum Aluminum Brass Stainless Steel And More === tab_instructions Loading Material Place the material on a Light Tack or High Tack Cutting Mat, making sure it is well- secured. If needed, use tape along the edges to help hold the material down to prevent shifting during creasing or etching. Adjust the pinch rollers on the cutter so that they can grip the cutting mat, but the material also fits between them. Load the cutting mat into the cutter. Installation Twist the dial counter-clockwise on the Tool Holder to loosen it. Remove the Blade Housing from the Tool Holder and insert the Easy Crease or Easy Etch Tool with the metal point facing down. Adjust the tool so that the tip sits roughly 3mm above the material. For reference, this is about the thickness of 10 stacked business cards. Twist the dial on the Tool Holder clockwise to tighten it, securing the tool in place. Perform test cuts to dial in the correct settings for your material. Setting Up Leonardo Once the design has been created or imported into Leonardo, change the lines from “Default (Cut)” to the appropriate settings for your tool in the Properties window. Click Send Design to bring up the preview window and change the Blade Tool setting to the appropriate tool. When sending multi-tool designs (i.e. cutting cardstock after creasing it), make sure to select “Keep relative positions of each layer” to ensure proper alignment.