Siser ColorPrint PU Gloss

Siser ColorPrint PU Gloss NOT FOR DESKTOP PRINTERS ColorPrint PU 14.5" only available in Matte Finish Material is 70 Microns/2.8 Mils thick Incredible stretch and rebound Thin, soft hand Print with solvent/eco-solvent inks HP Latex Set heater/dryer to 113°F/45°C – 122°F/50°C If printing heavy saturation ink, allow to dry 1 hour before cutting Grip-and-rip method CPSIA Certified Composition: PU Rolled materials to be used with wide format printers such as Roland, Mimaki, Mutoh, HP and Epson Accessories Actual width of material is 14.5" wide Due to the manufacturing process, material may vary in width by 1/8-1/4" Recommended Transfer Masks: TTD Easy or High Tack Mask 295°F Pre-heat garment, 15-20 seconds to apply Peel hot Medium pressure Print True Reading 100% uncoated polyester, 100% cotton and all poly/cotton blends in addition to lycra, spandex and leather Wait 24 hours before first wash, machine wash warm with mild detergent, do not bleach, do not dry clean, dry at normal setting Additional Instructions When printing on latex printers, you will need a higher tack mask to help with your masking process. We recommend using  TTD High Tack Mask when printing on HP latex printers or other latex printers