Siser Aurora 11.8" Roll (Yard)

Siser Aurora Heat Transfer Vinyl Get swept away by the color shifting surrealness of Aurora HTV! Aurora is a shimmering HTV that appears to change color when viewed at different angles— similar to our Holographic Pearl colors. What sets Aurora apart is a “woven” finish that makes the material appear textured while still feeling smooth. In addition to offering color shifting properties and a textured look, Aurora can also be layered with other layerable materials such as EasyWeed, Sparkle, and StripFlock Pro! Additionally, thanks to an opaque adhesive, Aurora colors retain their hues on both light and dark fabrics. Siser Aurora is CPSIA Certified so it's perfect for decorating children's clothing and accessories. Specifications: • PU Composition • 190 Microns/7.48 Mils CUTTER SETTINGS Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 30-35 Offset: .250 Speed: 10 Cricut Maker: Blade: AutoBlade, Fine-Point Setting: Light Cardstock Brother Scan N Cut DX: Blade: Standard, 3 Cut Speed: 5 Cut Pressure: 5 Silhouette Cameo 4: Blade: AutoBlade, 3 Material: Heat Transfer Smooth Force: 14 Speed: 8 Roland GS/GX-24: Blade: 45° Gram Force: 150-190 Offset: .250 Speed: 30-50 cm/s Graphtec: Blade: 45° Gram Force: 17 Tool: CB09U+0 Speed: 30 cm/s MH, SC2, LP3, Titan 1: Blade: 45°/60° Gram Force: 85-90 Speed: 300 mm/s *Blade Advancing Varies Titan 2 & 3 Blade: 45°/60° Gram Force: 75-80 Speed: 300mm/s *Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier completely cold Application Instructions (heat press) • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use firm pressure for 15 seconds • Peel completely cold RECOMMENDED ACCESSORIES & CARE Easy Puff Applies to: 100% cotton Poly/cotton blends 100% polyester Recommended Accessories: Siser Weeder Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean