Single Silicone Refill for Picky Party Pad Tray

Silicone refill for your Picky Party Tray. This listing is for a Single refill ONLY. (Picky Tray/Mold and beads are NOT included.) Non-Meltable - Do Not Microwave. Silicone refill kits available in the shop. Your Picky Party Tray can be used as a mold to create a new picky pad! This kit includes: - Two 1oz. liquid bottles to be mixed together using a 1 to 1 ratio. - A mixing cup to mix your liquid silicone - A wooden stirrer - Latex Gloves -Step 1: open bottle and remove cap -Step 2: Place liquid A and B into the mixing cup (Do NOT use your Picky Tray for Mixing) -Step 3: Use the mixer to softly stir the liquid for 3 full minutes. A longer mix time will ensure the optimal picky experience. -Step 4: Make sure your tray is clean and dry without any residue. -Step 5: Add beads into tray and gently spread out. DO NOT OVERLOAD TRAY WITH BEADS to avoid overflow. -Step 6: Pour mix into the picky tray/mold. -Step 7: To dry, leave the tray on a flat level surface with ventilation for approximately 2 hours.  Our Picky Party silicone cures best 75 degrees Fahrenheit for 2 hours. Colder temperatures may delay the drying time.  ⚠️DO NOT MICROWAVE SILICONE OR TRAY⚠️ ⚠️ Do NOT ingest - Avoid contact with eyes - Product cannot be removed from fabric or clothing. If in contact with skin, wash with soap immediately - Not recommended for people with silicone or latex allergies. This is not a toy Keep away from the reach of small children or pets - Adult supervision required⚠️ Picky Party Pad™ is a registered trademark under Picky Party™ and a copyrighted design. Attempts to copy, sell or redistribute this product for profit will be met with legal action under intellectual property infringement law.