Sine Tamer Dirty Electricity Whole House Filter

Dirty Electricity - this is a term that few people know about, but is becoming more well known in the area of EMF remediation. The recently popular way to deal with dirty electricity is to use plugin capacitance-based Stetzer style filters. Most people who are interested in mitigating dirty electricity will buy these type of filters, along with an EMI meter sold by the same company.  They test the field with the meter, then plug the filter into an outlet, and finally will plug in the EMI meter to test the line again, and the EMI shows a reduction in signal. To the layperson with no electrical background and understanding, this can seem impressive. However, these type of filters can actually make the magnetic component on the line much worse, as we will detail in full below. Dirty electricity not only has health impacts, but it can also impact all your electronics that are connected to the mains power! A basic understanding of “Dirty Power” is, “electricity that does not behave in the way we expect it to” and behaves erratically instead. Our homes have electrical systems that “expect” a specific voltage and frequency.  When the electricity that is delivered to our homes does not match these expectations, the result is, failing and malfunctioning equipment. Erratic Electrical Problems include: Power interruptions Power sags and swells caused by a variation in RMS voltage Variations in the frequency of the power Unbalanced voltage Surges or Transients in the voltage Waveform distortions We interviewed Terry Stotyn of Cratus Canada LTD (video interview posted below), who makes our SineTamer to exacting specs here in the USA.  We partnered with them, as they have the best dirty electricity solution we have found anywhere, when compared to other dirty electricity remediation approaches. Their technology uses frequency attenuation and can monitor 360 degrees of the sine wave, which an oscilloscope will clearly demonstrate. We recommend that you read through the text below to orient yourself with dirty electricity and the terminology. Then watch the interview we conducted with Terry in order to better understand what we are talking about, and to hear some new information that he has never shared in an interview previously.      It appears that many online outlets do not fully educate people on all the aspects of dirty electricity in a comprehensive way. Our goal is provide the most accurate information and the best solutions we have found, so you can make the most informed choice about how to protect your family and electronics from dirty electricity. Sine Tamer will only help with the power coming into your house, and is not a viable solution for all types of EMF, especially incoherent EMF transmitted from Wifi routers, cell towers, etc. These devices transmit a lot of incoherent noise on their carrier waves that affects our cellular biology.  For years, we have recommended Blushield EMF protection products.  On top of all the years of anecdotal testimonials and positive effects on livestock, Blushield is the only EMF protection device with an independent review board certified clinical trial and PubMed indexed peer reviewed medical journal paper that demonstrates its effectiveness across multiple biomarkers.  You can read about that here. That being said, if you can reduce the field effect that dirty electricity creates in your home, the better off you will be regarding your EMF hygiene. We have personally noticed a beneficial effect and after vetting everything we could get our hands on and all the companies we could speak with, we landed on Sine Tamer as our favorite dirty electricity solution for a number of reasons we will outline below. Dirty Power and the Health Risks “Dirty Power/Electricity” is a term utilized in many conversations these days, and it relates to the conditions made by the different power providers, and their processes of producing the power we utilize in our power grids of today.  The terms “Dirty Power” and “Dirty Electricity” are one and the same.  The byproducts that are a result of producing power for our usage are corrupted with anomalies that were not in existence 20 years ago, but have been introduced onto our power systems from the new high-tech, faster technology of our electronics and the computer age. This may seem complicated, but the message is, “Dirty Electricity/Dirty Power” is unpredictable energy that causes damage to devices attached to your electrical system, and has detrimental health side effects. The traditional power that has been supplied for decades by our electrical service providers has been relatively clean for over a hundred years, but due to increasing demand, additional sources have been required in order for the power providers to be able to keep up with the increased demand for electricity. These new sources of electricity that have been added to our traditional power come from new technological advancements in wind generated power systems, water generated power systems, and solar generated power systems. All of the “Dirty Power” produced by these systems comes from their inverters. Inverters are an intricate part of all secondary power production, and they are utilized to switch the DC power produced in the process and convert it to AC power, the type that powers appliances and devices throughout our homes.  It is important to note that this generated form of “Dirty Power” can be significant in strength, travels for miles on top of our generic power, and does not weaken with distance. All of these newer power generating systems and their advanced technology unfortunately have byproducts of their production that are detrimental to the operation of our everyday sensitive electronics and electrical systems.  These byproducts are a form of transients, which become part of the regular Hz frequency of our everyday power. They are introduced onto our power lines in the kHz to MHz frequency ranges, which are higher RF or radio frequencies.  These higher frequency transients are produced by the switch mode power supplies of Smart Meters and the Smart Grid.  RF or kHz frequencies have been studied for decades by doctors and militaries worldwide, and found to have serious health risks on the human body.  These higher frequencies flow on top of the regular power circuit wiring within a home or building, thereby becoming an antenna, and are produced by the Smart Meters' internal components.  Radiation of these frequencies is emitted outward from the internal wiring approximately 5-7 ft into the room from the walls.  According to many reports on this form of radiation, it breaks down the cell structure within the human body, and can cause numerous serious health problems. Surge Suppression was originally designed by our engineers over 40 years ago for the sole means of protecting our buildings and houses from the effects of devastating lightning strikes. This technology has remained relatively untouched for all manufacturers of suppression equipment ever since. This older 20th century technology was adequate for protecting electrical systems from lightning and power provider anomalies for many years, but over time, our computer and microprocessor technology has evolved enormously, supplying society with extremely fast production equipment as well as the ability to function in our lives virtually wirelessly. Over time, our microprocessor technology has continued to get faster and faster, and itbecame apparent to our engineers that a newer, more sensitive technology needed to exist in our suppression. A technology that can not only keep up with the ever-changing trends of our speedy computers, controls, and microprocessors, but a new circuitry protection was requiredto mitigate the effects of the dirty power conditions. Dirty power is comprised mainly of transients, which are a temporary rise in volts and current of a high energy and short duration. Transients disrupt, damage, or destroy our electrical and electronic equipment in an instant and/or cause cumulative damage over time resulting in unexplained failures or costly downtime.  Our sine wave forms have become corrupt with transients and the normal clean sine wave form has disappeared, with the new norm pictured below, or most often, significantly worse. Older suppression technology incorporates fixed clamp technology. Simply explained, protection is clamped at a fixed level above and below the sine wave form. When the transients gain a height of the clamps within the suppressor, they are clipped off at the predetermined levels as shown on next diagram. This however is 20th century technology, when the prime protection required was for catastrophic electrical anomalies like lightning or shorted main wires from the power service provider. This technology has little or no effect on any of the transients within the sine wave form. The transients within the sine wave form are the most harmful to our newer 21st century electronics and microprocessors. SineTamer’s unique Frequency Attenuation Circuitry brings about this kind of resulting protection no matter what level or severity that the transient anomaly induces.     Should I Be Concerned About Dirty Power? This might all seem very worrying, and you are right to be concerned. Symptoms can vary, and an individual can have many symptoms associated with this form of “Dirty Power”. List of Symptoms: • Sleep problems (insomnia, difficulty falling asleep, night waking, nightmares) • Stress, agitation, anxiety, irritability • Headaches, sharp pain or pressure in the head • Migraines • Ringing in the ears, ear pain, high pitched ringing • Tinnitus • Concentration, memory or learning problems • Fatigue, muscle or physical pain • Disorientation, dizziness, or balance problems • Eye problems, including eye pain and pressure in the eyes • Cardiac symptoms, heart palpitations, heart arrhythmias, chest pain • Leg cramps, or neuropathy • Arthritis, body pain, sharp, stabbing pains • Nausea, flu-like symptoms • Sinus problems, nosebleeds • Respiratory problems, cough, asthma • Skin rashes, facial flushing • Urinary problems • Endocrine disorders, thyroid problems, diabetes • High blood pressure • Changes in menstrual cycle • Hyperactivity or changes in children’s behavior • Seizures • Recurrence of cancer • Contracting cancer, brain cancer • Brain tumors • Rise in electro-sensitivity disorder The Larger Concerns About “Dirty Power” A terrible thing about having a corrupted source of “Dirty Electricity” is that it also affects us, the people, that live in the vicinity of “Dirty Power”. Dr. Sam Milham has studied and written books about these conditions, and his newest book entitled Dirty Electricity is a very good study on the health effects of both power and “Dirty Power”. You cannot see, hear or smell the problem!  Making it difficult to imagine that there is a problem at all. The problem is electrical pollution. This type of pollution can have a very detrimental effect on our health.  Just as dangerous as polluted water delivered to your home’s taps, “Dirty Power” delivered to your home circuitry causes a significant health risk to the homeowners.  The effects of RF/EMF (radiofrequency electromagnetic fields) on humans and animals are well documented.  Studies have indicated that cancers, ADHD, brain tumors, heart palpitations, diabetes and behavioral problems may all have a common link to “DIRTY POWER”.  It has been shown to cause problems with human cell “deterioration”, as well as adding to the effects of Electro-Hypersensitivity Syndrome (EHS), which many people suffer from currently, and is growing dramatically every year.  This “Dirty Power” RF kHz frequency has been categorized as a type 2 carcinogen by the World Health Organization (WHO). The SineTamer® brand of surge suppression has been in existence for approximately 20 years, and has been helping industry of all sizes, governments, and the military clean their power, enabling their sensitive electronics and equipment to function normally. The SineTamer® is not like your average surge suppressor sold in today’s market.  It is an engineered transient disturbance filter that monitors 360° of the sine waveform, not at all like the fixed clamped protection of all other units sold today. The SineTamer utilizes patented circuitry, which enables it to mitigate large transients introduced into our power systems from lightning strikes, right down to the smaller transients from our switches, motors, and electronics, which include the RF kHz frequencies. This gives the Sine Tamer the ability to provide full spectrum protection and regulation of the sine wave throughout your entire home or office!  The SineTamer® is effective in mitigating the kHz frequencies to lower than 1 volt RMS throughout the day, cleaning the power and freeing it from harmful anomalies on the sine wave.  Due to one-of-a-kind circuitry within the SineTamer suppression units, it is the only product worldwide which cleans our buildings' power systems, making them safe for humans, as well as producing a near perfect sine wave for our sensitive equipment to function like it was intended.  It is important to know that these “Dirty Power” transient anomalies on the various forms of power providers equipment can be mitigated at the source of transmission. The SineTamer® suppression units are extremely effective, when correctly installed.  SineTamer® is the only true product of its kind to remove the harmful anomalies of “Dirty Power” to a near zero level, and to supply our houses and buildings with true, clean, non-harmful power. What is the difference between SineTamer and all the other dirty electricity filters? To explain the fundamental differences, it is important to first understand the basics of Dirty Power. Dirty Power is a term used quite openly, and the major contributing factor of Dirty Power is the switching transient.  A transient is a very quick (milliseconds or microseconds) voltage spike generated by any kind of switching action within the electrical circuits, by electrical or electronic components.  These transients can be a few volts to thousands of volts or amps, and basically, every time something electrically is turned on or off, a reaction is created in the form of a voltage transient. Another way of creating voltage transients is from our electronics, and their Switch Mode Power Supply (SMPS), which is the main component that converts AC power to DC power, which is required for the electronics to function. It is important to note that the harmful RF and EMI (electromagnetic interference) that is present on our wiring within our houses and buildings from the Smart Meters is produced as a result of the transient action taking place from the SMPS functioning, and not just present on the power.  Smart Meters all have SMPSs as part of their electronic functioning within the meters themselves, and this is part of the Smart Meter’s ability to read aspects of power that the older analog meters were incapable of. As a transient spike rises after it is made, it produces RF (radiofrequency) in the range of 1 kHz all the way up to the MHz ranges.  As the transient hits the top of its spike and starts to fall back down to the sine wave form, it creates EMI (electromagnetic interference) as a result.  Because of the many transients generated every second from the Smart Meter, the RF and EMI values can be quite high during peak load times of the grid, and this harmful radiating RF and EMI has been studied and shown to affect the human cell structure, creating potential long term health effects. Plug-in filters, various power filters, and whole house filters that are sold to remove the harmful effects of RF and EMI from our power circuits, are limited in their ability to remove the varying ranges of frequencies generated from the Smart Meters.  For the most part, these products simply utilize capacitors, which short or shunt the excess energy away from the power line it is traveling on, and move it to the Neutral wire, or the Ground wire circuits, thus creating harmonics on the electrical system as well.  It may appear to be removing this energy when testing with plug-in meters, but in reality, it is not.  It simply shifts the energy to another wire, causing other issues within the power itself, and in actuality, causing bigger wiring emissions in the total electrical system. These other units unfortunately draw power to function (costing you more money to use them) and because of the shunting of the energy from one wire to another, also cause a much higher EMI and EMF level on the internal wiring within a home or building.  The SineTamer draws no power to function, only a minute amount to light 2 small LED lights to show that it is functioning properly.  The SineTamer absorbs the unwanted energy, disperses it throughout its internal components, and removes the excess energy as a low form of heat onto the ground wire, rather than shunting the energy to another circuit. The SineTamer® is an actual suppression device, unlike any other suppression unit made today.  The SineTamer’s function is to remove the energy from the voltage transients to an almost zero level on the sine wave form, before it starts to gain height, so that very little RF or EMI is generated. Inside the special protection circuitry are RF and EMI filters, which are part of our Frequency Attenuation filtering circuitry, and those work to remove the higher frequency transients that are above the line voltage power.  Once the transients are removed to very low safe level, then there is very little chance for RF and EMI to generate and become troublesome to either the power or the inhabitants of the home. It is vitally important for health reasons that all modes of the power are protected:  Line-Line, Line-Neutral, Line-Ground, and Neutral-Ground; as dirty power can enter into a house’s power supply through the neutral or ground leg, as well as through the power lines themselves.