Simplex Control Panel 120V LPD-B

Key Features Specs This control panel will operate a 120 VAC single phase 1/2 HP pump (or smaller). There are two circuit breakers in this control panel: A 20 Amp single pole circuit breaker for the pump, and a 10 Amp single pole circuit breaker for the alarm. The alarm is designed to be controlled with a float switch. When the float switch closes, you will be alerted by the 360 degrees top-mounted red alarm light, and the loud Piezoelectric buzzer. There are alarm test and buzzer silence-switches mounted in the door of the enclosure. This panel can be used to control a single sewage pump for a septic holding tank going into a treatment unit or pumping effluent from a low pressure dosing septic system. The enclosure’s rating provides protection from falling dirt, falling liquids, hose-directed water, and corrosive agents. It has a hinged lockable door with latches and included screws to secure the door if required. All electrical components are mounted inside the enclosure on an aluminum back plate. Hinged lockable door with one latch. Two circuit breakers for independent power delivery to components. Demand operation using a pump-rated wide-angle float (float switch is not included). Built-In Audible & Visual Alarms, with silence switch. Captive terminal strip for field wiring. Power Up To 1/2 HP Voltage 120 VAC, single-phase Size 8 in x 6 in Material Poly-carbonate NEMA Rating 4X