SikaTile 190 Reinforcing Fabric Roll

SikaTile-190 Reinforcing Fabric SikaTile-190 Reinforcing Fabric is a high-performance, type II, flexible, durable, nonwoven, polyester-engineered fabric for optional use with SikaTile®-100 Moisture Guard when installed under ceramic tile or stone on residential and commercial interior applications and is used to reinforce liquid waterproof membranes Features A durable polyester reinforcing type II fabric for use with SikaTile's waterproofing membranes Ideal for use over areas such as cracks, coves, corners, and areas around drains when used with SikaTile-100 Moisture Guard It can easily be cut to size with scissors or a razor knife and easily incorporated into the liquid membrane Significantly reduces reflective cracking Flexible and resists tearing High tensile strength Non-adhesive lays flat 8” x 165’ roll (110 sq. ft.) .30 mm thickness Limitations Protect from traffic, dirt, or dust from other trades until the final installation of the floor covering ▪ Do not use it as a final wear surface Do not use below 40º F (4º C); do not allow membrane or substrate to be below 40ºF (4ºC) for the first 72 hours after application Do not install over substrates containing asbestos Do not apply over self-stick tile, particleboard, or similar types of dimensionally unstable substrates Do not use over cracks or control joints subject to out-of-plane movement or in-plane movement greater than 3/8" (10 mm) Must be incorporated into the waterproof membrane during application Avoid exposing to sharp objects that could cut or puncture the material Do not use it as the primary roofing membrane