Short-scale JG style Guitar Kit with Mahogany Body, Rosewood Fretboard

Build a short-scale offset electric guitar from a box of parts. This DIY kit gives you a mahogany body, a bolt-on mahogany neck with a 22-fret rosewood fretboard, and two humbuckers you wire yourself. The 24-inch scale plays fast and comfortable, and the floating vibrato tailpiece adds expressive pitch bends once you set it up. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty Intermediate (5/10) DIY wiring of the offset rhythm and lead circuits means soldering multiple slide switches and pots Floating vibrato tailpiece and Tune-O-Matic bridge need careful intonation and setup Bolt-on neck and fully pre-routed body keep the assembly itself beginner-friendly Body Material: Mahogany Type: Solid Cutaway: Double (offset) Binding: None Top Veneer: None Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 610 mm / 24" (short scale) Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: White Plastic Headstock Shape: Standard (as in product images) Binding: None Nut: White Plastic Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 1 Volume, 1 Tone, offset-style rhythm and lead circuit with slide switches Wiring: DIY (soldering required) Wiring Diagram: HH, 1 Volume, 1 Tone, 3-Way Switch Output Jack: Side jack Hardware Bridge: Tune-O-Matic Tailpiece: Floating vibrato tailpiece (with arm) Tuners: Sealed diecast (6-in-line) Pickguard: 3-Ply Red Tortoise Pearloid Control Plate: Chrome-look plastic (not metal) Knobs: Black Cavity Covers: None Strings: Steel Finish: Chrome What's in the Box Offset mahogany body (unfinished) Mahogany neck with rosewood fretboard (unfinished) 2x humbucker pickups (ivory, open-coil) Wiring components (pots, slide switches, output jack, wiring - soldering required) Tune-O-Matic bridge Floating vibrato tailpiece with arm 6x sealed diecast tuners with mounting hardware White plastic nut Red tortoise pickguard Chrome-look plastic control plates 2x black control knobs Chrome neck plate with screws Mounting screws and hardware Allen wrenches (truss rod and saddle adjustment) Strings Guitar cable What You'll Need This kit requires soldering for the electronics. Depending on the finish and build you have in mind, you may need: For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire strippers For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat (polyurethane or nitrocellulose lacquer) For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.