Shining 3D FabCure 2

FabCure 2 is recommended as the standard post-curing tool for 3D printers from Shining 3D. With FabCure 2, each resin cure profile is finely tuned to bring the part to its peak performance through precise heat and light. FabCure 2 precisely defines the post-processing steps of the printed object to ensure high precision and optimal material performance, while automating the process. HIGH POWER MULTI-SURFACE LIGHT CURING From the sides and bottom, 30 multi-directional LEDs emit powerful UV light that instantly penetrates deep into the surface of the part, completely curing the printed object within a few minutes. With a power of 70W, these LEDs provide a high power curing cycle, ensuring an efficient curing process. RAPID CHAMBER HEATING The ceramic heating module is integrated with multiple temperature sensors. The chamber heats up quickly to 60 degrees, contributing to the enhancement of mechanical and flexural properties.The FabCure 2 heating system precisely controls ambient temperatures to 60 „ƒ. SMART MATERIAL LIBRARY With the most up-to-date cloud-based smart material library, the FabCure 2 is always synchronized. The FabCure 2 is equipped with Wi-Fi which enables over-the-air updates to deploy the latest firmware and configurations. Your device learns from our process engineering experts all the time. TECHNICAL SPECIFICATIONS Dimensions (W x D x H) 290mm x 290mm x 367.5mm Weight 10.5kg (around 24lbs) Curing volume Φ210mm H180mm Operating temperature 10~30°C Max. Curing temperature 60°C Light Source UV LED Wavelength 385nm~405nm LED Power 70W Power AC 100-240V, 150W Interface WI-FI