SHINGLE SEAL

Shingle-Seal- A waterborne rejuvenating spray-on sealer is made with a blend of resins engineered to create a sealer with excellent durability and adhesion to all asphalt-based roofing shingles and rolled roofing. This sealer penetrates the surface forming a durable film protecting the surface from moisture and weathering. Shingle-Seal improves the adhesion of the granules to the shingle and therefore restoring and extending the life of the roofing shingle. Stain blocking resins allow application over aged tar and worn shingles. ShingleSeal rejuvenates old and weathered shingles making them resistant to UV degradation, high winds, and hail, while also rejuvenating the colors/appearance and flexibility of the shingles.   5 gallons of concentrate makes 10 gallons of ready-to-use product. 2.5 gallons of concentrate makes 5 gallons of RTU   Uses Shingles Roofing Tiles Rolled Roofing Bond Extra Granules   Advantages Excellent UV Resistance Re-Apply 5 Years Low-Cost vs. New Roof Low V.O.C. Provides wind protection (flexibility) Excellent Weathering Abrasion Resistant (hail) Time Savings w/ No Mess Chalk Resistant Clean & ‘Green’-No messy, intrusive tear out, Keeping old shingles out of the landfills.   Packaging  5-gallon plastic pails. (Makes 10 gallons). Coverage 200 - 500 ft2 / gallon @ 2mils. Dry Time (77°F & 50% Rel. Humidity.) 1 hour to touch. Preparation Surfaces should be free of defects, dirt, and contamination. Application Spray apply or can be brushed or rolled on. Thin 50/50 with tap water. Do not apply coating system below 45 °F. Best results are obtained when surface and air temperatures are above 60°F and below 100°F. Clean-Up Clean brushes, roller-covers, and spray rigs with ordinary tap water until the wash water is clear. Clean up overspray with a mild soap and water solution. (Do not wait longer than 15 minutes).