Shimano Talica 50II

From Shimano: "The Talica is the pinnacle of the small lever drag 2-speed market and was designed from the ground up to be an excellent casting reel with an ultra-smooth and powerful drag system to handle long battles. Talica reels were purpose-built to take advantage of modern braided lines such as PowerPro Hollow Ace and shorter fluorocarbon leaders. Shimano offers the Talica in 11 different sizes to tackle a variety of offshore fish, from the football-size tuna to record-setting pelagic species." HEG: HEG consists of not only the gears, but also the frame, setplate, and handle-side sideplate. First we increased the size of the drive gear and the pinion gear to offer increased leverage and power. By using a one-piece frame that incorporates the setplate and adding a one-piece stamped sideplate, we have eliminated flex in the drive train that causes gears to bind under pressure. S A-RB BAITCASTING: S A-RB bearings are put through the same process as Shimano’s A-RB bearings but feature shields on both sides of the bearings. These shields reduce the possibility of salt or sand inhibiting rotation of the bearing. CROSS CARBON DRAG BAITCASTING: The Cross Carbon Drag material provides a wider range of drag settings compared to traditional drag materials. The Cross Carbon Drag provides the smoothest Shimano drag performance ever while providing anglers with increased durability. HAGANE BODY BAITCASTING: The HAGANE Body is a metal reel body with high rigidity. The body rigidity and impact resistance virtually eliminates body flexing on the reel while fighting fish. The result transforms the angler's actions directly into cranking power, increasing efficiency through strength. S-COMPACT BODY: S-Compact Body allows for all-day comfort and improved fishability by making the palming side plate up to 25% smaller than the A-Side plate. SUPER FREE SPOOL: Super Free Spool eliminates friction on the spool shaft during the cast. Standard baitcasting reels are constructed in a way that when the clutch bar is pressed down, the pinion gear is freed and can actually drag on the spool shaft. This creates friction that can limit the length of a cast. But baitcasting reels with Super Free Spool are constructed so that the pinion gear is supported by a ball bearing. When the clutch is disengaged in preparation for a cast, the pinion gear and spool shaft are kept in perfect alignment. The result: zero friction is placed upon the spool shaft and enhances casting performance. SPECIFICATIONS PRODUCT CODE WEIGHT POWERPRO LINE CAPACITY GEAR RATIO MAX DRAG MONO LINE CAPACITY RETRIEVE LINE RETRIEVE PER CRANK LOWER GEAR RATIO LOWER LINE RETRIEVE PER CRANK BEARINGS TAC12II 25.7 50/700, 65/400, 80/355 5.7:1 40 20/350, 25/280, 30/230 Right 41 3.1:1 22 6 TAC10 16.4 40/540, 50/535, 65/335 6.2:1 20 15/380, 20/270, 25/215 Right 38 6 - - TAC25II 33.5 65/1010, 80/730, 100/470 5.2:1 44 30/550, 40/420, 50/340 Right 46 2.3:1 23 6 TAC10II 18.6 40/540, 50/535, 65/335 6.2:1 20 15/380, 20/270, 25/215 Right 38 4.1:1 25 6 TAC16 23.6 50/845, 65/485, 80/430 5.7:1 40 20/440, 25/350, 30/300 Right 41 6 - - TAC8 15.9 40/395, 50/390, 65/235 6.2:1 20 15/280, 20/200, 25/165 Right 38 6 - - TAC20II 32.4 65/725, 80/575, 100/435 5.2:1 44 30/470, 40/320, 50/260 Right 46 2.3:1 23 6 TAC8II 18.2 40/395, 50/390, 65/235 6.2:1 20 15/280, 20/200, 25/165 Right 38 4.1:1 25 6 TAC16II 26.5 50/845, 65/485, 80/430 5.7:1 40 20/440, 25/350, 30/300 Right 41 3.1:1 22 6 TAC50II 56 80/1120, 100/945, 150/825 3.8:1 60 60/440, 80/340, 100/250 Right 45 1.7:1 20 6 TAC12 23.1 50/700, 65/400, 80/355 5.7:1 40 20/350, 25/280, 30/230 Right 41 6 - -