SHARPLINE 200 (Mask-Off)

Custom Converting & Slitting Available. Call 407-426-9175 5 Week Lead Time - Product is made to order.  SHARPLINE 200 Is a 5 mil latex saturated paper used for die-cut or hand-cut spray mask stencils and masking of surfaces to be painted. Used for sign lettering, auto pinstriping, and aircraft stenciling where paint is used instead of decals. Adhesive is formulated to withstand temperatures of 200 degrees F. to 300 degrees F. for short periods of time. The product is designed to prevent paint from bleeding through and allows for a clean sharp edge. A liner allows product to be die-cut if desired. Can be adapted for computerized stencil machines. This product is not intended for fly-away applications. DO NOT USE ON COPPER, BRASS, OR ANODIZED ALUMINUM. OUTDOOR EXPOSURE IS NOT RECOMMENDED WITHOUT PRIOR TESTING   Technical Data: Typical Properties - Backing: Basis wt., lbs/3000 sq. ft. 42-49 Thickness, mils 4-5 Tensile strength, lbs/inch M.D. 12.7 min Elongation, % M.D. 6.0 min Elmendorf tear, grams, M.D. 56 min C.D. 56 min Typical Properties - Adhesive: Base Natural latex Adhesion to steel, oz/inch width 24-30 (At time of manufacture) PSTC-1 (Modified) Typical Properties - Liner: flatback   Sharpline 200 Tech Data Sheet         Additional Information   Nominal Tape Widths vs Actual Widths Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples: 1" Nominal width = 15/16" (24mm) Actual width 2" Nominal width = 1-7/8" (48mm) Actual width 3" Nominal width = 2-13/16" (72mm) Actual width Note that tape rolls are NOT guaranteed to be splice-free.