
$199.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Reading EC with the Growlink Sensorex CS150 TDS Sensor The Growlink Sensorex CS150 TDS Sensor reads conductivity and total dissolved solids on a 12 mm graphite contacting probe rated for lab and light-industrial use. The cell constant is K=1.0, which covers the standard hydroponic feed range. A built-in PT1000 temperature element feeds Automatic Temperature Compensation back through the same cable. EC reads stay honest across reservoir temperature swings. Terminations include a BNC connector for instrumentation and tinned leads for transmitter wiring. The body is plastic with graphite measuring surfaces. Operating range is 0–70°C / 32–158°F. Tank or In-Line Mounting and Sensorex CX-Series Wiring The probe handles two install paths. Drop it into a tank for submerged reads. The in-line option uses an FC50P or FC75P gland and nut fitting through a tee, sized for ½″ and ¾″ NPT pipes. The lab cable variant talks to the Sensorex CM1000 meter. The 10ft and 30ft process cables wire into Sensorex CX-series transmitters such as the CX105, CX2000, CX2000RS, and CX3100. Pick the cable length that matches the run from probe to transmitter. Clean the graphite surface with gentle detergent or 5% HCl in a small cup between batches. The Sensorex CS150 conductivity sensor holds calibration through the cleaning cycle. Most rooms work through two probes a season once a graphite element has logged enough hours in high-EC drainback. Pair this graphite EC/TDS sensor with a Sensorex transmitter for continuous logging through the run. Keep a spare on the shelf for swap-day during summer drainback peaks. A spare cuts downtime when a probe needs cleaning mid-bloom. Key Features 12 mm Graphite Contacting Probe: Cost-effective EC/TDS read for lab and light-industrial reservoir or in-line use. K=1.0 Cell Constant: Sized for the standard hydroponic feed range — good resolution from veg through bloom EC values. PT1000 Temperature Element: Automatic Temperature Compensation built into the cable keeps EC readings honest across tank temp swings. BNC + Tinned Lead Terminations: BNC plugs into instrumentation; tinned leads land on Sensorex CX-series transmitter terminals. Tank or In-Line Mounting: Submerge in the reservoir or install in a tee with FC50P (½″ NPT) or FC75P (¾″ NPT) gland fittings. Technical Specifications Specification Value Sensor Type Contacting conductivity / TDS, graphite electrodes Probe Diameter 12 mm Cell Constant K = 1.0 / cm Temperature Element PT1000 (Automatic Temperature Compensation) Connector / Termination BNC + tinned leads (TL) Cable Length Options 10 ft (3 m) or 30 ft (9 m) Body Material Plastic body, graphite measuring surfaces Operating Range 0–70 °C (32–158 °F) Mounting Submersible in tank, or in-line via FC50P (½″ NPT) / FC75P (¾″ NPT) Compatible Transmitters Sensorex CX105, CX2000, CX2000RS, CX3100 (process cable); CM1000 (lab cable) Cleaning Gentle detergent or 5% HCl in cup/beaker
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$199.00