Hollow Body Archtop Electric Guitar Kit, Mahogany Body, Ebonized Fretboard

Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Advanced (8/10) Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Tune-o-matic bridge sets intonation quickly once the posts are seated Multi-ply binding must be masked carefully when finishing Body Material: Mahogany Plywood Type: Hollow Body Sound Holes: 2 f-holes Internal Support: Bridge block, Mahogany Cutaway: Single Florentine Style Binding: Multi-ply Black Top Veneer: None Neck Material: Mahogany Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75" Binding: Single Black Width at 5th Fret: 46 mm Width at 9th Fret: 49 mm Width at 12th Fret: 52 mm Width at 22nd Fret: 56 mm Fretboard Material: Ebony Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Nut Width: 42 mm Electronics Pickup: Piezo (under-saddle) Preamp: Side-mounted, 4-band EQ Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 2 Volume, 2 Tone, 3 Way Switch Wiring: DIY (soldering required) Wiring Diagram: HH, 2 Volume, 2 Tone, 3-Way Toggle Switch Output Jack: Side jack Hardware Bridge: Tune-O-Matic w/ Trapeze Tuners: Closed Pickguard: Black Knobs: Gold Cavity Covers: Black Strings: Steel Finish: Gold Plastic Covers: Black What's in the Box Hollow archtop guitar body with two f-holes and bound edges, unfinished Guitar neck with dark fretboard and abalone block inlays 6x gold sealed tuners with bushings and washers 2x gold-covered humbucker pickups in black mounting rings Pre-wired control harness with 4 potentiometers 3-way toggle switch with black tip and gold nut Gold tune-o-matic style bridge 2x gold bridge posts with anchors Gold trapeze tailpiece 4x gold domed control knobs Black archtop pickguard with gold mounting bracket Black bell-shaped truss rod cover 2x gold strap buttons with felt washers Set of strings Black instrument cable Allen wrench Assorted gold screws Gold trim rings, hex nuts and washers What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.