SEMCO Tile Resurfacing Kit

SEMCO Surfaces — Tile Resurfacing System SEMCO Tile Resurfacing Kit Microcement resurfacing system for covering existing tile without demolition. Available for pickup or local delivery only. Resurface ceramic, porcelain, or stone tile in place with a seamless, modern, grout-free finish for bathrooms, showers, floors, kitchen backsplashes, and more. Why Installers Choose It No Tear-Out Required Goes directly over sound tile when the surface is properly cleaned, profiled, and prepared. High Bond Strength Flexible microcement layers help create a strong bond over prepared tile and glazed surfaces. Interior & Exterior Use Suitable for vertical and horizontal areas when the correct preparation and sealing system is followed. Seamless Grout-Free Finish Fills grout lines and finishes to a smooth, modern surface that is easier to clean than traditional tile grout. Sealer Options Compatible with Titan Glossy for a gloss finish or Satin Stone for a satin, industrial-rated finish. Modern Microcement Look Creates a continuous architectural finish over existing tile without removing the original surface. What’s Included X-Bond Stone Bags Used for skim, fill, scratch, and build coats over properly prepared tile surfaces. X-Bond Liquid Bucket Primer and binder component used to promote adhesion and support the resurfacing system. X-Bond Additive Where Specified Adds body and trowelability for leveling and skim coat applications where required. Colorant Polished Bond Tone Decorative color component used to create the selected finished microcement tone. Nu-Lift & Stone Soap Quart Containers Cleaning and maintenance products included to support preparation and aftercare. Titan Glossy or Satin Stone Choose Your Sheen Sealer option for the final protected surface: gloss with Titan Glossy or satin/industrial with Satin Stone. Polished Bond Color Options Available Finish Colors Modern Grey · Montego Stone · Rawhide · Dried Herb · Espresso Bean · Grey Marble · Black Pearl · Sandy Beach · Blanco White Estimated Coverage Tile / Grout Condition Estimated Coverage Per Kit Notes Smooth tile, minimal grout relief Approx. 275–325 sq ft Best for backsplash or wall applications with light fill and tight trowel passes. Standard floor tile, approx. 1/8" grout joints Approx. 225–275 sq ft Extra material is used to fill grout lines before finish coats. Deep grout or uneven tile Approx. 175–225 sq ft Heavier fill and leveling reduce total yield. Coverage varies with grout depth, tile profile, porosity, and application thickness. Order approximately 10% extra for cuts, touch-ups, and project adjustments. Prep & Application Overview Step Process 1. Clean & Profile Degrease and clean tile thoroughly. Abrade or profile glossy surfaces for proper bonding. 2. Prime Prime with X-Bond Liquid to support adhesion over prepared tile. 3. Scratch / Fill Pass Fill grout lines and create a bonded base layer. Typical Liquid : Stone ratio is approximately 1:2. 4. Leveling / Skim Passes Use leveling or skim passes as needed for flatness. Typical Liquid : Additive : Stone ratio is approximately 1:1:2. 5. Decorative Coats Apply finish coats to the desired movement and texture. Allow proper dry time between coats. 6. Seal Seal with Titan Glossy for gloss or Satin Stone for a satin, industrial-rated finish. Product Video Downloads X-Bond Microcement Data Sheet PDF — product overview, system information, and application guidance Technical Sheet — X-Bond PDF — technical specifications, preparation information, and system details Proper tile preparation is critical. Existing tile must be clean, sound, bonded, and properly profiled before resurfacing. Always confirm moisture conditions, substrate suitability, and sealer selection before installation.