SeaKlear PhosKlear 4000 Phosphate Remover 32oz | 90265SKR

SeaKlear PhosKlear 4000 90265SKR is a highly concentrated thirty-two ounce liquid phosphate remover designed to cut down excessive phosphate levels that can feed algae growth in swimming pools. Its lanthanum-based formulation binds phosphates rapidly and allows them to be captured in the filtration system, providing clearer, more stable water with minimal product use. Suitable for routine upkeep or targeted treatment of high phosphate spikes, it supports better sanitizer performance and contributes to cleaner, healthier pool conditions. The formula can be applied directly to the water and is compatible with chlorine, saltwater, mineral, and UV systems as well as all pool surfaces. Its concentrated strength ensures dependable results for both service professionals and informed pool owners. Highlights Concentrated Phosphate Reduction: Formulated to eliminate elevated phosphates quickly, helping limit algae growth and improve water balance. Lanthanum-Based Binding: Uses lanthanum to pull phosphates out of solution and into the filter for removal without heavy clouding or residue. Boosts Sanitizer Efficiency: Helps chlorine and other sanitizers work more effectively by reducing nutrient levels that support algae. Versatile Pool Compatibility: Safe for use in all common sanitizing systems and on all pool surfaces including plaster, vinyl, and fiberglass. Thirty-Two Ounce Bottle: Provides enough product for routine maintenance cycles or concentrated treatment of high phosphate events. Instructions Treatment Dose: Use the dosage chart below to determine how much SeaKlear PhosKlear 4000 to add based on your pool size and current phosphate level. For example, a 10,000 gallon pool with 1,000 ppb of phosphates should be treated with 8 oz of product. Dosage Chart Phosphate Level (ppb) 5,000 Gallon Pool 10,000 Gallon Pool 250 1 oz 2 oz 500 2 oz 2 oz 1,000 4 oz 8 oz 2,000 8 oz 16 oz 4,000 16 oz 32 oz Initial Phosphate Treatment: Clean or backwash the filter before starting. Use the chart above to measure the correct amount of product. Pour the PhosKlear 4000 evenly across the pool surface. If the water is still cloudy after 24 hours, apply SeaKlear Chitosan Clarifier at 2 oz per 5,000 gallons. Run the filtration system continuously for at least 24 hours. If the filter pressure rises 10 psi above normal, clean or backwash the filter. After 48 hours, test phosphate levels with a swimming pool phosphate test kit and reapply product if needed. Weekly Dose: Add 2 oz of SeaKlear PhosKlear 4000 per 10,000 gallons weekly to help maintain low phosphate levels and keep the water clear. Important: Temporary cloudiness is normal while phosphates are being removed. The water may stay hazy for up to 24 hours depending on phosphate levels and filtration performance. Swimming should be avoided until the water clears. If desired, use SeaKlear Chitosan Clarifier at 2 oz per 5,000 gallons to speed up water clarity. Additional Info This section supports online shoppers researching SeaKlear PhosKlear 4000 (90265SKR) before ordering. It explains how to confirm phosphate levels, how the product behaves in water, and what to expect when the bottle arrives from SOSPool.com. Confirming Phosphate Levels, Pool Type & Treatment Needs PhosKlear 4000 is formulated to remove the elevated phosphate levels that contribute to algae growth. These answers help online customers confirm whether this is the correct treatment for their pool. How do I know if I need a phosphate remover? If algae returns frequently, or if phosphate test strips show readings above 300–500 ppb, using PhosKlear 4000 is recommended. Testing before ordering ensures accurate dosing. Is this product safe for all pool types? Yes — it works with plaster, vinyl, fiberglass, and pebble surfaces, as well as chlorine, salt, and mineral sanitizing systems. Does this product replace algaecide? No — it removes the nutrient source for algae. Using a sanitizer or algaecide alongside phosphate removal provides the best results. Application Method, Water Appearance & Filter Operation These questions explain what happens after adding the product. Will my pool cloud after applying PhosKlear 4000? Some haze is normal. It indicates phosphates are binding and being carried to the filter. Clarity returns as filtration removes the bound material. How should I apply the product for best performance? Pour the product around the pool perimeter while the pump is running. Running the pump continuously speeds up phosphate reduction. Will the product interfere with automatic chlorinators? No, it does not affect chlorinators, salt cells, dosing systems, or UV units. Ordering, Shipping & Post-Delivery Use These questions prepare customers for using the product once it is delivered. How quickly does PhosKlear 4000 ship from SOSPool.com? Orders generally ship promptly with tracking included. Delivery timelines follow standard carrier schedules. What should I check when the bottle arrives? Make sure the seal is intact and the product is free of leaks. Verify the size is the 32-ounce bottle before starting treatment. How soon can I use the product after arrival? It can be added immediately. Shake well, dose according to pool size, and operate the filter system continuously after treatment.