Schonstedt MPC-Rex Combo Kit

Specifications GA-92XTd Magnetic Locator Specifications Gain Settings: 4 levels: Low, Medium, High, and Extra High Volume Settings: Muted, Medium, and Maximum Battery Indicator: 4-segment LCD Power Source: One 9V battery Battery Life: Approximately 24 hours of intermittent use Operating Temperature: -13°F to 140°F Overall Length: 26 inch open; 15.5 inch closed Nominal Sensor Spacing: 9.5 inch Water and Dust Resistance: IP54 rated Rex Receiver Specifications Active Frequencies: 512 Hz, 33 kHz, and 82 kHz Passive Frequencies: 50 or 60 Hz Sonde Frequency: 512 Hz Power Source: One 9V battery Battery Life: Approximately 12 hours of intermittent use Maximum Line Depth: Approximately 19 ft Sonde Depth: Approximately 5 to 15 ft Overall Length: 27.7 inch extended; 17 inch closed Operating Temperature: -4°F to 140°F Water and Dust Resistance: IP54 rated Rex Transmitter Specifications Operating Frequencies: 512 Hz, 33 kHz, and 82 kHz Operating Modes: Conductive, inductive, and inductive clamp Maximum Output Power at 512 Hz and 33 kHz: 0.5, 1, 2, or 5 W Maximum Output Power at 82 kHz: 0.5 or 1 W Battery Type: Rechargeable 12V NiMH battery pack Battery Life: Approximately 8 hours of intermittent use Charging: Internal smart charger powered by AC/DC adapter Dimensions: 10 x 10.25 x 1.75 inch Operating Temperature: -4°F to 140°F Water and Dust Resistance: IP54 rated Product Description The Schonstedt MPC-Rex Combo Kit combines magnetic locating and pipe and cable locating in one field-ready system. It includes the GA-92XTd Magnetic Locator for detecting buried iron and steel objects, along with the Rex Multi-Frequency Pipe and Cable Locator for tracing underground water, sewer, gas, electric, and telecommunications utilities. The complete system is designed for utility professionals who need both locating methods available without carrying separate kits. The GA-92XTd features a retractable design that extends for greater sensitivity and folds down for easier transport. It provides four gain levels, three volume settings, a four-segment battery indicator, and approximately 24 hours of intermittent operation. The Rex receiver supports 512 Hz, 33 kHz, and 82 kHz active frequencies, 50/60 Hz passive power detection, and 512 Hz sonde locating. It offers depth capability up to approximately 19 feet in line mode and 5 to 15 feet in sonde mode, depending on the sonde and site conditions. Two transmitter variations are available. The standard MPC-Rex includes a rechargeable multi-frequency transmitter with output power up to 5 watts at 512 Hz and 33 kHz. The MPC-Rex Lite uses a lighter 1.9-pound transmitter powered by ten AA batteries and is available in dual-frequency configurations. Both kits include IP54-rated locating equipment and fit into a custom shoulder bag for transport between jobsites. In the Box Rex Receiver with one 9V Battery (in unit) Rex Transmitter with Rechargeable NiMH pack (12V) GA-92XTd Magnetic Locator with one 9V Alkaline Battery (in unit) 2 Plastic Holsters Conductive Clip Assembly which includes Standard Conductive Clips — C91010 (Red) and C91011 (Black) Soft Carrying Case Ground Stake Small Heavy Duty Clip Large Heavy Duty Clip AC/DC Power Adapter for charging Transmitter