SCAG Windstorm WS23-37BV-EF

Here is how you make a large task that is time consuming turn into a fast job well done.  You got to have the right equipment and the Windstorm by SCAG Power Equipment is just the ticket.  This unit is the perfect gear for the customer with large parking lots or areas that need clearing fast!  See the power this unit has below: Heavy-duty industrial/commercial  Briggs Vanguard  Big Block EFI  61E 37 HP @ 3600 RPM 54.0 ft-lbs. (peak)  4 cycle gas, electronic fuel injection (EFI), twin-cylinder, air-cooled, OHV, vertical shaft  engine 993 cc (60.6 cubic inch) Mechanical type governor with variable speed control set at 3600 rpm (±100 rpm),  idle set at 1750 rpm (±150 rpm)  Large capacity 2-stage canister air filter  Single.  exhaust canister muffler  Integral fuel pump with inline fuel filter, internal fuel line vent; float feed; two barrel,  adjustable idle, afterfire solenoid.  Full pressure lube, capacity 2.3 Liter with spin-on oil filter  12 volt "maintenance-free" sealed battery (350 CCA) with alternator, solid state  ignition with key start. 20 amp charging system- regulated  Effective CFM: 6,000*  Theoretical Peak CFM: 7,500**  All steel, welded, 8-blade, dynamically balanced  23" diameter / 8.5" width  Tapered hub  All steel, welded, 12-gauge front and side housing plates; 10-gauge back plate  10"  15" front intake with rear intake vents  69 sq. in.  Nozzle Direction System (NDS). Mechanical lever provides up to 16° of vertical tilt  adjustment to the nozzle. Two switches, an Auto Left/Right and Fine Tune Switch,  provide up to 180° of horizontal rotation to the nozzle.