StoneTech Salt Water Resistant Sealer

StoneTech Salt Water Resistant Sealer Features High-performance protection against saltwater damage For natural stone and masonry surfaces around saltwater pools Protection against water-based stains Preserves natural look Easy-to-use, water-based formula Where to Use Porous tile, natural stone, concrete pavers, terracotta, and grout Best suited for porous substrates. If used on poured concrete, slight darkening or enhancement of the surface may occur Directions for Use Allow new grout installations to cure for at least 72 hours before application. Make sure the surface is clean, dry, and free of waxes and coatings Surface temperature should be between 35°F and 90°F. Keep children and pets out of the area until foot traffic resumes Mask any surfaces not intended to be treated Liberally apply an even coat with a bristle paintbrush or paint roller Allow sealer to penetrate the surface for 15–20 minutes During this time, distribute excess sealer over the entire area to ensure even penetration Do not allow sealer to pool on the surface Thoroughly wipe the entire surface with a clean, dry cloth to completely remove all excess sealer from the surface DO NOT ALLOW EXCESS SEALER TO DRY ON THE SURFACE The sealer should be fully cured before water contacts the surface A complete cure is achieved in 72 hours. If there is a possibility of rain within the 72-hour cure time, cover the surface so it remains dry Clean tools used during application with water If resistance to oily stains is also desired, apply StoneTech Professional BulletProof Sealer after the Salt Water Resistant Sealer has fully cured Available Sizes and Coverage Gallon: 315-475 sq ft 5 Gallon: 1,575-2,375 sq ft