S65 4.2L Engine Rebuild

This engine includes replacement of the OEM rod bearings with high performance bearings, CarBahn Autoworks valve springs, 2mm over-sized 94mm CarBahn-CP forged pistons and head gaskets. Connecting rod bearing and valve springs are common failure items on S65 and S85 engines. In response, CarBahn Autoworks has developed improved bearings and valve springs. This rebuild includes a valve job with new hydraulic lifters, plus timing chains, timing chain guides, timing chain tensioners and all associated seals and gaskets. History Steve Dinan has been building high performance and racing engines for BMW s since 1977, winning 11 racing championships including 3 prototype championships and two 24 Hours of Daytona. The same engine shop that builds the racing engines also builds the street car engines; these talented engineers, machinists, and builders have built hundreds of engines from OEM street rebuilds to full-blown racing engines. Refer to the graphs below for the power results without catalytic converters on 100 octane race gas and using J607 (the typical aftermarket correction). S65 4.2L Wet sump: RPM TRQ HP 3500 329.4 219.5 4000 346.8 264.1 4500 348.2 298.3 5000 339.4 323.1 5500 340.6 356.7 5800 340.3 375.8 6000 334.2 381.8 6500 331.6 410.4 7000 329.8 439.6 7500 317.0 452.7 8000 309.3 471.1 No cats, 100 octane unleaded, J607