S1 Pro Multi Sense Zigbee

Presence and environmental sensing without cameras or cloud dependency. Wall-mounted Zigbee mmWave sensor tracking up to 3 targets. One device gives a complete picture of your space. Peace of Mind, Built In. Presence Without Cameras. Detects presence using radar, not cameras. No images. No recordings. No watching. Air You Can Trust. Continuously monitors eCO₂, VOCs, IAQ, temperature, humidity, air pressure, and gas resistance. So you know when your environment isn’t as healthy as it should be. Feedback When It Matters. Light and sound respond through Home Assistant automations. You decide when and how the device alerts you. Privacy, By Design. All data stays local in Home Assistant. No cloud. No subscriptions. Understands space, not just motion. mmWave Presence Sensing Advanced mmWave radar continuously tracks presence for up to three people simultaneously, including their position, distance, and movement. This allows the system to understand where someone is in a room, not just that someone moved. With support for three configurable detection zones and one exclusion zone, you can precisely control where presence should trigger automations, and where it should be ignored. Fast, continuous updates ensure detection feels instant, stable, and reliable, even when people move slowly or remain still. Clear insight, right out of the box. Air Quality Intelligence Built-in air quality sensing continuously monitors eCO₂, VOCs, IAQ, and gas resistance, giving you real-time insight into the air you breathe. Changes in air quality are detected early, helping you respond before comfort or focus is affected. For applications where absolute accuracy matters, an optional high-precision add-on enables true CO₂ measurements. This modular approach lets you start with meaningful air quality insight immediately and upgrade when needed. Comfort, kept in balance. Temperature & Humidity Temperature and humidity are measured continuously to provide a clear picture of indoor comfort. These readings help identify conditions that feel too warm, too dry, or too humid often before you consciously notice them. By understanding how temperature and humidity change throughout the day, automations can respond more intelligently, maintaining a stable and comfortable environment without constant manual adjustment. Aware of light, indoors and out. Light Sensing Integrated light sensing measures ambient light levels (lux), allowing the system to understand real-world lighting conditions in and around your home. This goes beyond simple on/off detection. Lighting automations can respond naturally to changing daylight and cloud cover, enabling smarter behavior for lighting, shading, and energy efficiency based on actual light levels, not fixed schedules. Clear signals, when you need them. Physical Feedback A built-in LED and buzzer provide immediate visual and audible feedback, offering clear confirmation when something changes. Whether it’s presence detection, air quality alerts, or system status, feedback is always direct and unambiguous. All feedback behavior is fully controlled through Home Assistant automations, giving you complete control over when, how, and if the device communicates from subtle indicators to clear alerts. A purple breathing LED indicates when the device is not connected to Zigbee. Adapts to how and where you install it. Modular by Design Optional mounting add-ons enable flexible positioning. Choose a standard ball mount for flat wall surfaces, or a corner ball mount for clean installation in 90° wall corners. Optional USB-C add-ons adapt the device to different installation scenarios. The device includes a standard USB-C port on the bottom for wall-mounted use with a cable. Use the male USB-C accessory for direct plug-in to a wall power adapter. Use the female USB-C accessory when placing the sensor upright on a shelf, TV cabinet, or other flat surface. Engineered to Understand Your Home. Processing & Connectivity ESP32-C6 microcontroller 32-bit RISC-V single-core processor Native 2.4 GHz IEEE 802.15.4 Zigbee Works with Home Assistant ZHA and Zigbee2MQTT No Wi-Fi credentials, cloud account, or ESPHome setup required Does not operate as a Zigbee router or repeater mmWave Presence Radar Hi-Link LD2450 mmWave radar Detection range adjustable from 20 cm to 6 m Horizontal field of view up to 120° Vertical field of view approximately 70° Tracks up to 3 targets simultaneously Outputs real-time position, distance, and movement data Home Assistant target updates every 0.5 seconds Supports 3 detection zones Supports 1 exclusion zone Air Quality Sensor Bosch BME688 eCO₂ equivalent values VOC equivalent values Indoor Air Quality index Gas resistance measurement Temperature measurement Humidity measurement Air pressure measurement Optional CO₂ Add-on True CO₂ measurement using NDIR technology (Sensirion SCD40) Measurement range up to 40,000 ppm High accuracy and long-term stability Integrated temperature measurement Integrated humidity measurement Light Sensor Lite-On LTR-381RGB-01 Ambient light measurement in lux Feedback Components Full-color WS2812 RGB LED MLT8530 piezo buzzer Purple breathing LED while Zigbee is disconnected Home Assistant Add-on Build interactive 2D and 3D floorplans View live presence targets in 2D and 3D Analyze movement using spatial heatmaps Configure range, detection zones, and exclusion zones What's in the Box Exactly what you need to get started. S1 Pro Multi Sense Zigbee PCB S1 Pro Multi Sense enclosure LD2450 mmWave sensor Standard ball mount ESD-safe packaging Note: Optional add-ons (CO₂ module, male/female USB-C adapters, corner ball mount) are sold separately. Simple assembly required (mount sensor to PCB, fit into enclosure). No USB-C cable or power adapter included — use your own 5V supply. Requires a Zigbee coordinator. ZHA users should install the Sensy-One custom quirk.