Rubi Cyclone Tile Leveling System 1/8" Flat Bases

Rubi Cyclone Tile Leveling System 1/8" (3MM) Flat Bases Rubi's new leveling system is designed to avoid lippage during the laying of ceramic tile in both floor and wall tiles. Features Available in 100, 300 and 2400 quantities Recommended for tiles 12" x 12" and larger Especially recommended to improve finishes when working with large-format tiles Easy, fast, and intuitive to use as no prior user experience is necessary No tools required - spin the screw cap into place and hand tighten Spacer bases fit below tiles, and then the cap is screwed on Guaranteed flatness and regularity of the laying surface Side grooves at the strap´s base facilitate the transfer of the adhesive, improving the coverage on the ceramic tile Built in spacers Each clip thickness is easily identified thanks to the range of different colors available (1/8" is a red clip) Recommended for tiles thickness from 3 - 18 mm (1/8" - <3/4") Simple impact removal system (by kicking or mallet) - Always in the direction of the grout joint Cyclone Caps sold separately Technical Data Use on most tile and stone from 3 - 18 mm (1/8" - <3/4") thick Minimum joint size: 1/8" (3mm) 100, 300, or 2400 bases per bag How to use STEP 1: Place spacer bases under tile once thinset has been applied STEP 2: Apply Cap. The cap will align with the top of the base, allowing for easy threading STEP 3: Spin the cap onto the base, and once the cap makes contact with the tile, turn the cap until the adjacent tiles are level; no need to over-tighten STEP 4: Break off caps and bases after the thinset has cured. It’s important to break the cyclone caps by kicking them or hitting them with a rubber mallet in the direction of the grout joint STEP 5: Remove the broken bases from caps by unscrewing them (caps are reusable and will last multiple jobs with proper installation and removal)