Rubi Cyclone Tile Leveling System 1/16" Flat Bases

Rubi Cyclone Tile Leveling System 1/16" (1,5MM) Flat Bases Rubi's new leveling system is designed to avoid lippage during the laying of ceramic tile in both floor and wall tiles. Features Available in 100, 300, and 2400 quantities Recommended for tiles 12" x 12" and larger It is especially recommended to improve finishes when working with large-format tiles Easy, fast, and intuitive to use, as no prior user experience is necessary No tools required - spin the screw cap into place and hand tighten Spacer bases fit below tiles, and then the cap is screwed on Guaranteed flatness and regularity of the laying surface Side grooves at the strap's base facilitate the transfer of the adhesive, improving the coverage of the ceramic tile Built-in spacers Each clip thickness is easily identified thanks to the range of different colors available (1/16" is a white clip) Compatible with other threaded leveling system caps Recommended for tiles thickness from 3 - 18 mm (1/8" - <3/4") Simple impact removal system (by kicking or mallet) - Always in the direction of the grout joint Cyclone Caps are sold separately Technical Data Use on most tiles and stone from 3 - 18 mm (1/8" - <3/4") thick Minimum joint size: 1/16" (1,5mm) 100, 300, or 2400 bases per bag How to use STEP 1: Place spacer bases under the tile once the thin set has been applied STEP 2: Apply Cap. The cap will align with the top of the base, allowing for easy threading STEP 3: Spin the cap onto the base, and once the cap makes contact with the tile, turn the cap until the adjacent tiles are level; there is no need to over-tighten STEP 4: Break off caps and bases after the thin-set has cured. It's essential to break the cyclone caps by kicking them or hitting them with a rubber mallet in the direction of the grout joint STEP 5: Remove the broken bases from caps by unscrewing them (caps are reusable and will last multiple jobs with proper installation and removal)