RUBBER RECTANGULAR PLUG

A black, rubber, two-prong plug, available in black and white.  This plug easily accepts all of our wires except for our 16 and 14 gauge pulley cord. (For that cord, please use the Round Plug with Neck or one of our 3-prong plugs.) Note that if you are going to use one of our three-conductor wires, you should clip the ground wire (the green one) on both ends. Note that this plug has a stretchy bit of rubber around the hole the wire goes through which means there is no gap around the wire no matter the diameter of the wire. To remove the insert for wiring, we recommend using a tiny flat-head screwdriver - place the screwdriver under the shell and lift it so that the tab is clear of the hole in the shell.  If you put the screwdriver further in until it is behind the tab, you can ease it forward until the inside is clear of the shell.  This procedure is not necessary for everyone, just for those who have trouble just pulling the inside out of the shell. Attributes UL: UL-Recognized, 15A-125V Made in: Mexico Wire Opening Diameter: 8.33 mm, 1/3" Polarity: Polarized