RPS 110CC Dirt Bike Off Road, dual disc brakes, 30 inch seat height, 14 inch front tire

Want a more powerful and robust mini dirt bike for your kid? Then, get your little rider on the 110cc X Moto 110 CCHigh-Performance Gas Mini Dirt Bike. This bike has a classic frame and fairings, giving your little rider the motocross look and feel you know they'll love. Available in kick start and loaded with all standard safety features, support, and reliability. Higher Grade Wheel Bearings: This bike comes with high-grade wheel bearings that easily carry heavy and high-speed loads. Easy to Ride: MotoTec 110 Gas Mini Dirt Bike is simple to ride, kick start, and comes with all standard safety features. Longer Wearing Tires: The Gas Mini Dirt Bike's tires are made from tough material that lasts long even in all types of terrains. The power of the 4-Stroke dirt bike engine has been tweaked to give out gobs of torque necessary for the challenges off the roadway. Don't worry about the speed, and there is a front and rear single-piston brake that helps stop the bike right on its track when the rider hits the brake.   This bike has an upgraded expansion chamber for more speed than other mini dirt bikes out there, as well as front and rear suspension to keep young riders safe when they're on bumpy terrain. The X Moto 110cccc 4-Stroke Dirt Bike - The latest generation 110cc  mini bike is suitable for every condition and offers hours of fun in almost any outdoor environment.  Moreover, the mini bike is EPA approved and equipped with higher grip tires, high-quality suspension, high-grade wheel bearings, In addition, the bike provides the front hydraulic fork suspensions and the 310mm rear shock absorber. Hence, your kid will have the best handling, control with in the class.     CA customers: this item is NOT CARB-approved, but you may use it on your private land.     Key Features DESCRIPTION 110 series 110 DLX series Engine Type Single cylinder, air cooled, four stroke, horizontal machine Displacement (ml) 106.693 106.693 Bore and Stroke (mm) 52.4x49.5 52.4x49.5 Compression Ratio 9:00:01 9:00:01 Max. Power (kw/r/min) 5.0kW/7500rpm 5.0kW/7500rpm Max. Torque (N.m/r/min) 7.5N.m/5500rpm 7.5N.m/5500rpm Max. Speed (km/h) 80 80 Lubrication Pressure, splash  Pressure, splash Clutch Type Manual / wet  Manual / wet Ignition CDI  CDI Starting System Kick Start  Kick Start Transmission System Chain  Chain       CHASSIS     DESCRIPTION 110 series 110 DLX series Front Brake Disc  Disc Front Brake Disc  Disc Front Tire 2.50-14 2.50-14 Rear Tire 3.00-12 3.00-12 Suspension Regular Shocks   Inverted Suspension   DIMENSIONS     DESCRIPTION 110 series 110 DLX series L*W*H (mm) 1625*780*1030 1625*780*1030 Seat Height (mm) 775 775 Wheelbase (mm) 1210 Min. Ground Clearance (mm) 150 150 Max. Capacity Weight (kg) 75 75 Engine Oil (L) 0.9 0.9 Fuel Tank Capacity (L) 6.1 6.1   TECH SPECS Engine Type : Single Cylinder, Air Cooled, Four Stroke, Horizontal Machine Max Power : 6HP Clutch Type: Manual /Wet Ignition: CDI Starting System Kick Start Transmission System: Chain Front Tire:14 in Rear Tire:12 Dimensions L*W*H* = 5' * 2' * 3' Seat Height= 2.54' Max Weight Capacity: 165 lbs.   Warranty THIS LIMITED WARRANTY COVERS THE FOLLOWING PARTS ONLY: ENGINE: All internal lubricated parts, i.e. Pistons, piston rings, piston pins, connecting rods, rod bearings, camshaft, camshaft bearings, timing chain, crankshaft, crankshaft main bearings, oil pump, water pump, valves, valve springs, valve guides, valve seats, valve lifters and valve push rods. Additionally, the engine head and cylinder will only be covered if damage is caused solely as a result of the mechanical failure of one or more internal lubricated components listed above. (Broken gears any damage from outside impacted is not covered warranty) ENGINE CASE: The Engine case itself will only be covered if the damage caused was solely as a result of the mechanical failure of one or more of the internal lubricated components listed above. (Broken gears any damage from outside impact is not covered warranty) DRIVE SYSTEM: All internal lubricated parts contained within the drive axle housing case, i.e. differential, differential gears, drive shaft, drive axles, CV joints, axle bearings, reverse gears and output shafts. The drive axle housing as well as the reverse gearbox housing, if damaged solely as a result of the mechanical failure of one or more or the internal lubricated components contained the drive axle housing will be covered. (Any bent, broken, or damage by outside impact is not covered warranty) FUEL SYSTEM: For carbureted vehicles; Carburetor, vacuum fuel pump, intake manifold, fuel tank and fuel petcock. For fuel injected vehicles; Fuel injectors, fuel pump, fuel rail and fuel pressure regulator. ELECTRICAL: Stator, stator pickup, magneto, voltage regulator\ rectifier, CDI, starter relay\ starter solenoid, starter motor, coil, distributor assembly and injector relay. COOLING SYSTEM: Radiator, radiator cap, thermostat, thermostat housing, temperature indicator switch, cooling fan motors; water pump and water pump housing. BRAKES: Calipers, drum housings, drum brake linkage, reservoirs, rotors, and lines. CHASSIS: Frame, swing arms, A-arms, steering controls, (if not caused by jumping or impact.) TRANSMISSION (Automatic or Standard): All internal lubricated parts contained within the transmission case, i.e. flywheel, hydraulic shift linkage, kick start spindle, kick start secondary gear and transmission gears. The transmission case itself will be covered if the damage was solely as a result of mechanical failure of one or more of the internal lubricated components contained within the transmission case. (Improper shifting of gears by not coming to stop complete can cause damage to internal gears. ("This cause is not covered warranty") WHAT IS NOT COVERED: The following is a list of items not covered by the warranty policy. This list is not all inclusive and may be modified at any time. Batteries, Belts, Brakes and Brake Pads, Chains, Clutch, Foot peg mount, Hand Levers, Hoses, Lights, Mirrors, Plastic Body, Seats, Shocks, Spark Plugs, Tires, Transmission. COVERAGE AND LIMITATIONS: Initial assembly and preparation must be preformed in accordance with the Consumer Motor Vehicle Delivery Preparation and Inspection Form that is provided by the manufacturer. Additionally, all work must be performed by a professional mechanic (i.e. engine repair shop, motorcycle shop, or local auto repair shop) or an authorized Dealer of the manufacturer to assure your vehicle is in good working condition. Upon completion, you must mail in the Consumer Motor Vehicle Delivery Preparation and Inspection Form signed by the technician that performed the service. You will need to provide proof of this service when filing a warranty claim, so (end user) must keep your receipts. Subject to the limitations stated in this agreement, Kartquest.com agrees (at its sole discretion) to replace a covered component if the covered component fails as a result of one or more of the internal lubricated parts within the component stated warranty period from the date of purchase, while the component has been used under the conditions and in the manner specified by its original manufacturer. Keep in mind these off-road units are built for recreational use only. Your claim may be denied under the following circumstances: Misuse or abuse of the vehicle, i.e. Jumping Stunt riding Modification of any kind Racing Riding at constant wide open throttle (over revving the engine) Unit is used as a rental Damage is caused by an accident Product is used in a manner that it is not designed for Rider abuse Improper adjustment\operation of the clutch, i.e. dragging, causing premature burning of the friction plates Improper adjustment\operation of brakes. Driving with parking brake on. Improper gear engagement, i.e. engaging reverse will moving forward Improper maintenances, i.e. Lack of routine maintenance Repairs performed improperly, Use of incorrect lubricants Improper initial set up Use of aftermarket parts for repair The following items are not covered: Tires, rims, body panels, fuses, forks, shocks, gaskets, light bulbs, seats, CV Boots, oil filter, air filter, fuel filter, filters, clutch wear parts, cables, drive belt, chain, spark plug, any part made from rubber, belts, brake linings and/or pads, batteries, sprockets, external springs, clips, nuts, bolts and fasteners. HANDLING OF WARRANTY CLAIMS: FOR PARTS: All Parts warranty issues must be processed through https://kartquest.com/pages/part-request  or if directed by the manufacturer. You must produce a copy of your original invoice showing the model number, vehicle identification number and date of purchase on the invoice, as well as a copy of your Consumer Motor Vehicle Delivery Preparation and Inspection Form to warranty your product directly. All defective parts must be returned to Kartquest.com or the manufacturer as directed for inspection and verification of defect. Kartquest.com reserves the right to decline any warranty claim based on the criteria listed in the COVERAGE AND LIMITATIONS portion of this warranty. FOR ENGINES: All Engine warranty issues must be processed through Kartquest.com or if directed through the manufacturer of the unit purchased. In ether case, after obtaining an RMA number from Kartquest.com, you will be provided with a return shipping label. The motor must be removed from the vehicle, safely packaged and shipped to our repair facility located at the address listed on the shipping label. Kartquest.com or the manufacturer reserves the right to decline any warranty claim based on the criteria listed in the COVERAGE AND LIMITATIONS portion of this warranty. ​