Rotor Q-Ring Aero Red Outer Chainring

Red is faster. Obviously. This is Rotor’s Q-Ring in the solid Aero style for the Outer Chainring. It’s the same as the black version, only red anodized. Just as stiff, just as power-enhancing, just as aero, but with a faster finish. This is identical to the Standard Rotor Q-Ring, just it is a filled in CNC-machined plate of 7075 aluminum. It confers an aero advantage because there’s less turbulence caused by it spinning. However, the weight penalty is minor and solid rings are stiffer, so shifting and efficiency should improve. Rotor’s Q-Rings are oval, with what they refer to as 10% ovality. That means their 53-tooth outer ring varies its leverage, from being a virtual 51-tooth chainring at the dead spot, to a virtual 55-tooth ring at the most powerful. This way, your legs can get through the dead spots faster and then have more power when pushing down at the sweet spot of the stroke. Carlos Sastre, riding for Team CSC was intrigued by the rings. He put them on his bike. He won the 2008 Tour de France on them, and used them for the rest of his successful pro career. A bio-mechanics student brought Q-rings to the lab. She found that Q-rings were faster than round rings and resulted in riders putting out more power. She found an average increase of 26.7 watts, or an increase of 6.2% for the same effort. As you can imagine, that means there’s reduced oxygen consumption and heart rate at sub-maximal efforts. Rotor believes everyone can benefit from oval rings. The important thing is to set them up properly. You’ll notice many extra holes drilled where the rings are bolted to the spider. There are actually three different positions, something Rotor calls OCP3, or three Optimum Chainring Positions. This will allow you to tune the position so you’re arriving at the maximum chainring diameter at exactly the right moment in your stroke. A guide comes with the ring to help you determine your perfect position. This Q-Ring can be paired with a round inner ring, or a Rotor Q inner ring. Rotor’s Standard Q Outer Ring can be had in either compact (110mm) or standard (130mm) bolt circle diameters. They are designed to mate perfectly with Rotor spiders, but can work with just about every manufacturer’s spider, including those with embedded power meters. Of note: there is a limitation if you want to set up SRAM or FSA BB30 cranks that feature a one-piece spider with a Rotor Outer Ring, you’re limited to the 53-tooth ring in the #3 OCP position. The Rotor Aero Red Outer Q Chainring not only makes you faster, but makes your bike look faster, too.