Rotary Switch Wireling

DESCRIPTION This Wireling features a 10-position Rotary Encoder which could be used as a discrete setting adjustment or anything else you can think of! This board outputs digital signals via an I²C I/O expander. New to Wirelings? Check out the Wireling Overview! Note* 5-Pin Wireling cables not included and sold separately.   TECH SPECS SH-7010TA Rotary Encoder Specs 10 Position Switch I2C Semtech SX1505 I/O Expander TinyDuino Power Requirements Voltage: 3.0V - 5.5V  Current: 1.0uA (Normal Mode).  Due to the low current, this board can be run using the TinyDuino coin cell option Pins Used A5/SCL - I²C Serial Clock line A4/SDA - I²C Serial Data line Dimensions 16mm x 10mm (.630 inches x .393 inches) Max Height (from the lower bottom of Wireling to upper top Wireling Connector): 7.50mm (0.30 inches) Weight: 1 gram (.04 ounces) NOTES You can also use this Wireling without the TinyDuino – modifying the connecting cable by removing the opposite connector and stripping/tinning the wires, you can solder the connector cable to any other microcontroller board of your choice!    DOWNLOADS SH-7010TA SX1505 Datasheet Eagle Files Schematic SX1505 Arduino Library Rotary Arduino Example Sketch CAD 3D and 2D Files