
$16,800.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
A Used Pre Roll Machine at Commercial Scale One unit, previously owned, listed as like new and fully functional. That is the whole proposition and it is worth being clear about it. Second-hand at this level is a real strategy. A commercial filler is a capital item, and the depreciation on the first owner is somebody else's problem. What you give up is the factory warranty, which does not follow the machine. You also give up the ability to specify, since the configuration is whatever the previous owner chose. Tray and cone size fittings vary across these machines, so confirm what is physically in the box. The same goes for hours run and any parts already replaced. None of that is a reason to avoid used equipment. It is a reason to ask before committing rather than after. Treat the figures below as the model specification rather than a measurement of this individual unit. What This Cone Filling Machine Does on Paper The RocketBox 2.0 fills 453 cones in a cycle, which takes around three minutes a tray. STM rate the model at up to 20,000 pre-rolls in a day if you keep feeding it. A seven inch high definition touchscreen runs it, with a USB port so fill programmes can be saved and reloaded. Cone sizes covered are 70, 84, 98 and 109 mm. It takes the full tray or two 72-count trays with an adapter fitted. The frame is 304 stainless steel on heavy duty casters, measuring 24 by 37 by 27 inches and weighing around 350 pounds. Standard supply is 110 volts, with a 220 volt option on new units. A density-testing graduated cylinder ships with a new machine, so check whether this one still has it. Every number in this paragraph describes the model, not the specific unit. Key Features Condition: Previously owned, described as like new and fully functional Availability: A single unit rather than ongoing stock Cycle capacity: The model fills 453 cones per cycle, about three minutes a tray Daily output: Rated by STM at up to 20,000 pre-rolls a day Controls: Seven inch HD touchscreen with a USB port for fill programmes Cone sizes: Runs 70, 84, 98 and 109 mm cones Trays: Full 453-cone tray, or two 72-count trays with an adapter Build: 304 stainless steel on heavy duty casters Warranty: The factory warranty applies to new units and does not transfer Technical Specifications Specification Value Model RocketBox 2.0 Condition Pre-owned, described as like new Quantity One unit only Capacity 453 cones per cycle (model figure) Cycle time About 3 minutes per tray (model figure) Daily output Up to 20,000 pre-rolls (model figure) Controls 7 in HD touchscreen with USB Cone sizes 70, 84, 98, 109 mm Trays 453-cone, or two 72-count with adapter Material 304 stainless steel Dimensions 24 in L x 37 in H x 27 in W (model figure) Weight About 350 lb (model figure) Power 110V standard, 220V option on new units To confirm Configuration, hours run, accessories present, parts replaced Location: St. Peters, MO
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$16,800.00