Revival Signature Complete Wire Harness Loom Kit

Protect your new wiring harness end to end from the elements, helping to ensure it has a long life and you spend more time on the road than you do on the side of it.  Included in the kit you’ll find PVC Vinyl Loom, Woven Split Loom, Double-walled, adhesive lined Heat Shrink and Tesa Fabric Tape.  When assembling this kit we took the average lengths we generally use on a build and added a few more feet of each just to be sure we've got you covered. But if your swinging from ape hangars or find another need additional Vinyl and Split loom can be purchased by the foot here in our store. Our system incorporates Vinyl Loom for exposed areas to protect from weather, Split Loom under the tank and seat to allow for drainage with Tesa Tape at transitions from one Loom to another, as well as Heat Shrink at loom terminations. This arrangement can produce a harness that will keep the elements out but allow for drainage should water get in so that your harness isn’t steeping in it, allowing for slow absorption through the wire sheathing resulting in corrosion and increased wire resistance and electrical failure.  You can find descriptions for each material as well as lengths or quantities provided in the Details tab. Click on the Specs tab if you want to get nerdy on the specifics all of the classifications, as well as manufacturer approvals. Vinyl Loom Diameter Length 1/8in / 3.175mm 5ft / 1.524m 3/16in / 4.762mm 6ft/1.8288 1/4in / 6.35mm 6ft/1.8288 5/16in / 7.937mm 3.5ft/1.0668 3/8in / 9.525mm 5ft / 1.524m 1/2in / 12.7mm 4ft / 1.2192m 5/8in / 15.87mm 2ft / 0.6096m PVC vinyl tubing is made for automotive wiring and is what you often find on OEM motorcycle harnesses. It makes for a clean, tidy appearance of visibly exposed wiring while providing a high level of protection from the harsh environment your system will be exposed to. This PVC vinyl tubing is extremely flexible, liquid-tight, abrasion-resistant and meets VW-1 flammability along with UL type B standards which is why it’s the industry standard for motorcycle wiring harnesses.  Split Loom Diameter Length 5mm 5ft (3.048m) 8mm 3ft/0.9144 13mm 2ft (0.6096m 19mm 2.5ft (0.762m) 25mm 2ft (0.6096m)   Our Split Loom is an industrial-grade product approved for use by nearly every automotive manufacturer you can think of. The high-density flat-knit weave combination of PET monofilament and textured Multifilament won't unravel at the ends and provides superior abrasion resistance while it protects your wiring from fluids by allowing moisture to drain away.  It is s the creme de la creme of harness solutions providing durable, heat resistant protection while being the easiest option to work with. No fishing wires down a tube, or tape wrapping; add, remove or inspect wiring without deconstructing your harness apart in the process. The high-density flat-knit weave combination of PET monofilament.  Tesa Tape Length 25 Meters Width 19 MM Tesa Cloth Harness Tape is not your run of the mill electrical tape. The industrial-grade harness tape designed for use in the inhospitable environs of engine bays and is the very same tape used by Mercedes, VW and numerous other automotive manufacturers. Made from abrasion-resistant PET cloth and backed with an acrylic adhesive, this tape has high tensile strength and the adhesive will not turn to goo when exposed to heat or fuel. You can use this tape to wrap an entire harness and rest assured that it won't become a sticky dirty mess.  Dual-Wall Heat Shrink Cut to 6" lengths Diameter quantity 1/8" 2 3/16" 4 1/4" 6 3/8" 4 1/2" 2 3/4" 1 1" 1 Polyolefin Dual-Walled Heat Shrink has a myriad of applications when wiring a bike. Heat shrink can be used for an added layer of protection from abrasion, chaffing, fatigue, and strain relief to the wire as well as joints and terminals. A Cross-linked treatment closes the pores in the PVC decreasing the ability for fluids to find a way in, the hot melt glue inner layer further seals out water, fuel, and solvents from entering from the sides and at the endpoints. Secure wire loom in its place while helping seal moisture out of PVC Vinyl Loom terminations. Applications: In-line Splicing Terminal Sealing Strain Relief Mechanical Protection Connector Sealing Vinyl Loom SPECS MIL-63ID specs VW-1 flammability standards UL type B ratings Max Temp 221° F (105° C) Min Temp -4°F (-20° C) Split Loom Physical Properties Specification Unit Value Min/Max Continous Temperature --------------- F° (C°) -40°/302°F (-40/150°C) Peak Temperature (240h) --------------- F° (C°) 347°F (175°C) Melting Point ISO 11357-3 F° (C°) 500°F (260°C) Abrasion Resistance ISO 6722 SAE ARP 1536 A LV 312 RSA 36 05 035 B cycles 6450 244714 2400 MG4 (C) Flammability FMVSS 302 SAE J 369 mm/min --------- <100 self-extinguishing Chemical resistance SAE J 2192 D7 1924 --------- Resists the majority of chemicals and Automotive fluids (oils, coolant, battery acid, brake fluid, fuels, windshield washer...) Manufacturer Approvals: Direct Christler, Ford, GM, Iveco/CNH, Jaguar/Landrover, Peugeot-Citrogen, Renault, Volvo, Toyota. Via Tier-1 Honda, Mazda Dual-Wall Heat Shrink Standards and Certifications 3:1 shrink ratio Shrink temperature: 90°C Continuous operating temperature: -55°C to 110°C UL 224, 125°C CSA C22.2 No.198.1 125°C AMD-DTL-23053/4, Class 3 UL/CSA approval  Tesa Tape BACKING MATERIAL PET CLOTH TOTAL THICKNESS 10.23 MILS TYPE OF ADHESIVE ADVANCED ACRYLIC ADHESION TO STEEL 45.68 OZ/IN ELONGATION AT BREAK 40 % TENSILE STRENGTH 157.02 LBS/IN TEMPERATURE RESISTANCE MIN. -40 °F TEMPERATURE RESISTANCE (3000H): 302 °F ABRASION RESISTANCE (10MM MANDREL): CLASS D (ACC. TO LV312) ABRASION RESISTANCE (5MM MANDREL): CLASS D (ACC. TO LV312) FLAME RESISTANCE CLASS B (ACC. TO LV312) UNWIND FORCE (ROLL WIDTH > 9MM): 11 N/ROLL (30 M/MIN) NOISE DAMPING