Retro Center Post

Brass Railing Center Post Retro Center Post is used to create a brass railing with a 21st century look. Place posts at regular intervals for a cohesive appearance. Rod passes all the way through post. Recommended spacing for posts is 8” – 12”. Rod may sag if longer spacing is used. Overall Height: 2-15/16" Top Diameter: 1" Height to Top of Rail: 2-5/8" Post Diameter: 3/8" Base Diameter: 1-1/4" 3 Screw holes in base Screw size: #4 x 1/2" Rod Hole: for ¼” Diameter Rod ** See: GUIDE for matching posts, rod and layout tips.** Matching Retro Posts End Post Corner Post Wall Mount Post Brass Railing Rod 36" Length Rod  72" Length Rod  Check attachment method to be sure it works with your design. ** See bottom of page for install information. ** Retro Post are raw unfinished - solid brass. See link above for additional information.  These post can be polished and lacquered for a long lasting shine or left to age naturally. If preferred, the brass can be colored using various procedures. Although we do-not offer this option, if you search online there are various brass coloring techniques and solutions available. Check attachment method to be sure it will work with your design. Install on Wood Surface. Not for glass or stone. Attach to surface top with wood screws: Layout brass railing Cut rods to appropriate lengths Loosely assemble rods and posts Mark screw location and drill necessary pilot holes for brass screws Slip rods in place. Insert brass screws through holes in base of posts. Carefully screw them down into pre drilled holes.