PCB Through Hole Component Lead Bender For Retro Vintage Computers

ToTs RETRO Resister Lead Bender This tool is essential when repairing or building your "through-hole" electronic retro PCB components.  I used it to help me make my Commodore Replica 1581 look beautiful, with perfect bends for all the components.  I used it on the resistors, diodes, some capacitors, ferrite beads, made the job very easy.  Can also be used with Apple Macintosh, Retro PC's, Atari, Amiga, NeXT Computers and More.    How to use:  Simply line up the resistor bender over the two holes until you can see both holes touch the edge of the resistor bender and that is your size.  Place the component in the slot closest the what you measured and bend the leads down against the edge, then turn the tool sideways to remove the component and solder into your board.  I like to get all the components bent correctly for a circuit or part that I’m working on and then solder them in all at one.  Personally, I prefer not to bend the leads of the components against the PCB, to help make removal easier ( if needed later).  You can use some blue painters tape to hold components in place while you make the solder connections  Can Be Used For Most Through-Hole Components: Capacitors, Ferrite Beads Resistors, Diodes, Inductors and more Features 3D Printed PLA Two Sizes Included Color: White, Brown Grey, Let me know which color you want with a note on your order. Want to print it yourself? Get the STL here--> https://www.thingiverse.com/thing:6623566   commodore 64 commodore 128 commodore 1541 commodore 1541-II commodore 1571