Replacement Lever

REPLACEMENT ADJUSTMENT LEVER Universal fit • Height & tilt control • 2-minute installation YOUR CHAIR'S COMMAND CENTER The adjustment lever is how you control your chair's height and tilt—the two most critical adjustments for proper ergonomic positioning. Lift the lever to raise or lower your seat height. Push it forward or pull it back to adjust your seat tilt angle. These aren't luxury features—they're essential controls for maintaining proper posture during marathon sessions. WHAT THIS LEVER CONTROLS: Seat Height: Lift the lever while seated to drop the chair down. Lift while standing or lifting your weight to raise the chair up. Critical for matching your console, desk, or work surface height. Seat Tilt: Push the lever forward or pull it back to adjust the Active Tilt™ angle. This is how you fine-tune your forward-leaning position for console work. Designed to fit seamlessly into both adjustment locations on your Stealth Chair, this lever ensures effortless customization regardless of which control mechanism breaks. Whether you're a sound engineer fine-tuning mixes or a lighting technician perfecting a stage setup, this universal lever restores your chair to peak performance. WHY LEVERS FAIL (AND WHY IT'S NOT YOUR FAULT): Metal fatigue: Hundreds of adjustments per week over years of use eventually stress the internal mechanism Accidental impacts: Kicked during cable runs, hit by road cases, or caught on gear during moves Transport damage: Touring chairs take abuse—levers are exposed and vulnerable Over-force: Forcing a stuck adjustment can bend or break the lever mechanism Lost during moves: Levers can work loose and fall off during transport Wear from heavy use: Multi-user environments with constant height changes accelerate wear Here's the reality: a broken lever makes your chair basically unusable for professional work. You can't adjust height to match different consoles. You can't dial in your tilt angle. You're locked into whatever random position the chair happens to be in. For professionals who move between rooms, venues, or rigs with different working heights, that's unacceptable. SIMPLE 2-MINUTE INSTALLATION INSTALLATION PROCESS: 1 Remove the broken lever Pull or unscrew the damaged lever from the control mechanism (depends on which adjustment point). Some levers pull straight off, others require a small Allen wrench to loosen a set screw. 2 Install the new lever Slide the new lever onto the control shaft and align it to your preferred angle. If there's a set screw, tighten it just enough to hold—don't over-tighten or you'll strip the threads. 3 Test the adjustment Operate the lever through its full range of motion. It should move smoothly and return to neutral position. Adjust the height up and down to verify the mechanism engages properly. TOOLS YOU MAY NEED: Most Stealth levers install tool-free, but some adjustment points have a small set screw that requires a 3mm or 4mm Allen wrench (hex key). If your original lever had a set screw, you'll need the same size for the replacement. Takes literally 30 seconds to tighten once the lever is positioned. Total time: About 2 minutes. No special skills required. If you can change a guitar string or swap a mic cable, you can replace this lever. SPECIFICATIONS Length: 5.5 inches (14 cm) Width: 1.2 inches (3 cm) Handle Thickness: 0.5 inches (1.3 cm) Material: High-Grade Steel Finish: Powder-Coated Black Installation Time: ~2 Minutes UNIVERSAL COMPATIBILITY: Designed for Stealth Standard and Pro models. Universal fit means this single lever works for both height and tilt adjustment locations. Crafted from durable, high-grade materials that match the sleek, professional aesthetic of your Stealth Chair while standing up to daily use in demanding environments. This is the genuine OEM replacement—not a generic part that might not fit correctly or fail under professional use. RESTORE CONTROL, OPTIMIZE YOUR POSTURE A broken adjustment lever isn't just inconvenient—it compromises your entire ergonomic setup. Without height control, you can't match your chair to different work surfaces. Without tilt adjustment, you can't dial in the forward-leaning angle that makes ZenWave™ technology work. You're stuck with whatever position the chair happens to be locked at, which defeats the entire purpose of owning a professional ergonomic chair. Your $750 chair becomes unusable over a $10 part. We stock this lever so you can restore full functionality in minutes, not wait weeks for a manufacturer repair. This is especially critical for touring professionals who work at different venues with different console heights every night. A broken lever on tour means you're stuck at the wrong height for an entire show—which means back pain, fatigue, and reduced performance. Having a spare lever in your road case means you can swap it out during load-in and keep working comfortably. This lever represents our core philosophy: professional equipment should be built to last, easy to maintain, and impossible to make obsolete. As long as we're making Stealth Chairs, we'll stock every part you need to keep them performing like new. PRO TIP: KEEP SPARES FOR TOURING RIGS Touring engineers and techs: keep a spare lever in your road case, gear bag, or with your chair's transport case. Levers are exposed parts that take abuse during load-in/out. For the cost of one venue meal, you've got insurance against being stuck at the wrong height for an entire show. For venues and studios with multiple chairs: consider keeping 2-3 spares in your parts drawer. When a lever breaks during a session, you don't want to be ordering parts and waiting days for delivery. Swap it in 2 minutes and keep the show moving. OTHER REPLACEMENT PARTS Complete your maintenance kit with these other critical replacement parts: Backrest Adjustment Knob Control backrest height positioning for perfect lumbar support Suspension Bushings Restore smooth pivoting motion and ZenWave™ technology Extra-Tall Cylinders Extended height range for lighting positions and standing consoles