Repair Godox AD200 / AD200PR0 - Drop / Water Damage Or E1-E9 Errors

Important: Before you begin, please read this instructions on ordering for your Godox Repairs.  This is not a part for self-service and you must Enable Email Notification during check out to get your instructions on sending it in otherwise there will be delays. You're a working photographer and you've depended on your trust Godox AD200 and Adorama's eVOLV 200 and suddenly you get E0, E1, or E3 errrors and it stops firing.  Symptoms:   E0, E1 or E3 Error Smoking Board or Non-Responsive Dropped in Water (Will Require Screen AD200 Screen Replacement) You'll have 2 choices - purchase a new strobe to replace or thankfully, send the AD200 or eVOLV200 to us and we'll replace the main board for you to get you back into shooting as soon as possible. One thing to note, this repair does not correct mis-alignment of your outside AD200 body, or repair the back screen and the controls on the back of your Godox AD200 and AD200 Pro if it is cracked.  If your strobe still works, this fix is not for you.  This repair does not include any other body parts.   Please see the following links that might better suit your repairs:  https://cheetahstand.com/products/repair-ad200pro-damaged-outer-shell-no-issues-with-the-functioning-of-the-flash  or https://cheetahstand.com/products/repair-ad200-or-ad200pro-broken-lcd-and-or-broken-control-switches If you have any questions about which repair to select for your Godox or Adorama's Flashpoint AD200 or AD200 Pro, please feel free to contact us so that we can help make sure you have working strobes again!