Reno A&E RAD-1-PL Plug In Loop Detector

The Reno A&E RAD-1-PL is a single channel plug-in loop detector with two programmable solid-state outputs and a rear 10-pin Molex connector (09-48-1104). It runs on 10 to 30 VDC or 14 to 26 VAC and draws 8 mA max with no call. The unit is 2.30 x 2.5 x 0.80 in. Output A is presence. Output B is set for loop fault, same as A, pulse on exit or pulse on entry (250 ms). Both are open collector outputs rated 100 mA at 30 VDC. It has four sensitivity levels, four loop frequencies, automatic tuning, sensitivity boost, lightning and surge protection, and color coded LEDs. Loop inductance range is 20 to 2100 µH. It operates from -30°F to 165°F. Before You Order Plugs into 10-pin Molex detector ports, including Chamberlain/Elite SL3000 and CSW200; Advanced Access Automation CSL2000, CSW2000 and RSW1000; All-O-Matic SL100-DC, SL150DC, OH200DC, SW300DC and SW350DC; Intelligate IQ500 and IQ5000; Linear (OSCO) SL and SW with APeX controller; late SECOM operators with 10-pin Molex; Viking L-3, F-1, T-21, H-10, B-12 and Q-4; Apollo 4300 and 4500. Similar fit and function to the EDI LMA-1800. Solid-state outputs only. For relay contacts, use an 11-pin relay detector.