Reno A&E PLH-24-40-R EverLoop Rugged Preformed Loop - 4'x8' w/ 40' Lead

The Reno A&E PLH-24-40-R is a prefabricated inductive loop and lead-in assembly for direct burial in dirt or gravel. It is sized for a 4 ft x 8 ft rectangular loop (24 ft perimeter) with a 40 ft lead-in cable. The loop cable, lead-in and splice enclosure arrive joined and tested, so there are no field splices at the loop. The high-visibility red outer jacket is Elexar 8451 thermoplastic elastomer (TPE) for abrasion resistance and flexibility in cold weather. Wire insulation and inner jackets are cross-linked polyethylene (XLPE), and the cables are filled with water block gel. The splice enclosure is high-impact, glass-impregnated plastic with soldered, sealed and tested connections. Reno A&E puts typical detection height at about 2/3 of the shortest loop side, roughly 2.7 ft on this 4 ft wide loop. Covered by a 10-year limited warranty. What's IncludedPreformed loop cable, 40 ft lead-in cable and splice enclosure as one factory-sealed assembly Before You Order Model format is PLH-perimeter-lead-R: PLH-24-40-R is a 24 ft perimeter loop with a 40 ft lead-in. Install in a shallow trench that holds the loop and lead-in, secure the corners with corner brackets, then backfill with at least 6 in of cover over the loop. For new asphalt or poured concrete, use the standard PLH version. Not for saw cutting into existing pavement. Use a Reno A&E PLA or PLB loop for saw-cut retrofits. Requires a vehicle loop detector, sold separately.