Reno A&E PLA-20-50 20ft Loop Perimeter w/ 50ft Lead in

The Reno A&E PLA-20-50 is a saw-cut preformed inductive loop with a 20 ft loop perimeter and a 50 ft lead-in cable. Typical loop sizes for this perimeter are 4 ft x 6 ft or 5 ft x 5 ft. It fits a 1/8 in or wider saw slot, and the loop and lead-in arrive factory-spliced. The loop cable is four-conductor #20 AWG stranded tinned copper, and the lead-in is two-conductor #20 AWG. Insulation is cross-linked polyethylene (XLPE), 0.040 in nominal. Two extra feet of loop cable are built in to take up saw-cut variation, and the exact-fit layout needs no 45° corner cuts. Splices are soldered, sealed and tested at the factory. Covered by a 10-year limited warranty. What's IncludedPreformed loop with 50 ft lead-in cable, factory spliced Before You Order Model format is PLA-perimeter-lead: PLA-20-50 is a 20 ft perimeter loop with a 50 ft lead-in. Standard leads are 20, 50 and 100 ft. Cut the loop slot 1/8 in wide and at least 1-1/4 in deep, widen the lead-in slot to 1/4 in, and remove sharp inside corners. Place the extra loop cable and splice in the lead-in slot or in a 1 in drilled hole, then fill the slots with loop sealant. Loop sealant and backer rod are sold separately. Two loops wired in series should be the same size and the same distance from the gate or door. Requires a vehicle loop detector, sold separately.