Reno A&E AX2-3-2C LD 2Ch-120VAC Fail Safe ***Discontinued - Unavailable***

Discontinued by Reno A&E. The AX2-3-2C is a two channel loop detector with one relay output per channel. It has two rear 11-pin Amphenol connectors, one per channel, with both NO and NC contacts available on each channel. It runs on 120 VAC (89 to 135 VAC). The housing is 3.00 x 1.75 x 4.30 in, excluding the connector. Each channel runs True Presence or a 250 ms pulse on entry. Four sensitivity levels and four loop frequencies per channel are set with front panel DIP switches, with sensitivity boost and channel scanning. Power-down memory tracks loop status through power interruptions of any length. Relays are rated 6 A. Fail-safe: on power loss or a loop fault, the outputs go to the detect state. It operates from -30°F to 180°F. Before You Order No longer made by Reno A&E. EDI does not name a direct replacement. Same family: the -4 (12/24 VDC, 24 VAC) and -8 (240 VAC) versions, single (1C) or dual (2C) connector, NO or NC contacts, fail-safe or fail-secure (S), and the AX2DL with directional logic. Dual connector models need two 11-pin sockets or harnesses.