REGO 9101H5

Designed specifically for vapor or liquid withdrawal service on DOT fork lift containers. Valves with 1.5 GPM closing flow are for use in small and medium size lift truck applications, while those with 2.6 GPM closing flow are for large lift trucks. Since none of these valves have an integral pressure relief valve, they may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that cylinder’s capacity. |The integral excess flow valve found in all these service valves helps prevent excessive product loss in the event of fuel line rupture. |When installed for liquid withdrawal, the 9101P6 Series has provisions for attachment of a liquid withdrawal tube. The 9101P5 Series must be installed in containers that have provisions for a separate liquid withdrawal. |To ensure proper functioning and maximum protection for integral excess flow valves, these service valves should be fully opened and backseated when in use. Specifications Approximate Filling Rate Liquid Flow(GPM) Pressure Drop Across Valves 10 (PSIG) - 5 GPM Approximate Filling Rate Liquid Flow(GPM) Pressure Drop Across Valves 50 (PSIG) - 10.7 GPM Approximate Filling Rate Liquid Flow(GPM) Pressure Drop Across Valves 100 (PSIG) - 14.9 GPM Approximate Filling Rate Liquid Flow(GPM) Pressure Drop Across Valves 25 (PSIG) - 7.6 GPM Closing Flow Lp Gas Vapor 25 (PSIG) Inlet - 550 scfh Closing Flow Lp Gas Vapor 100 (PSIG) Inlet - 1050 scfh Container Connection (in.) - 3/4" M. NGT Liquid Withdrawal Connection(in) - None Service Connection Size(in) - 3/8" M. NPT Accessories-Acme Check Connectors Cap - 7141M-40 or 7141FP Accessories-Acme Check Connectors Female - 7141F Accessories-Acme Check Connectors Male - 7141M Brand - RegO Closing Flow Lp Gas Liquid(GPM) - 2.6 GPM Container Connection Type - M. NGT Liquid Withdrawal Connection Type - None Service Connection Type - M. NPT Features & Benefits Incorporates integral excess check valve and shut-off valve in one unit. Special 1.5 GPM closing flow on select valves provided especially for lift trucks and equipment with smaller engines. Double lead stem thread provides faster opening and closing. O-Ring stem seal design provides positive seal. Tapered and confined seat disc provides positive shut-off. Metal-to-metal back seat provides added protection against leakage while the valve is open. 9101P6 Series equipped with a 1/4” NPT internal thread for the addition of a liquid withdrawal tube.